Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• When the computer is in use, shut down all other application software currently running before you install “ImageMixer VCD2.” Technical support of “ImageMixer VCD2” is provided by the Pixela User Support Center. For more information, refer to the enclosed information with the CD-ROM. Enjoying images on your computer Required computer environment a Installing “ImageMixer VCD2” 5 Set up the menu background, buttons, OS: Mac OS X (v10.1.5 or later) The above OS must be installed at the factory CPU: iMac, eMac, iBook, PowerBook, Power Mac G3/G4 series Memory: 128 MB or more (256 MB or more is recomended) Hard Disk: Disk space required for installation: approximately 250 MB Display: 1024 . 768 dots or more, 32000 colors or more • QuickTime 4 or later must be pre-installed (QuickTime 5 is recommended). • Operations are not guaranteed for all recommended computer environments mentioned above. titles, and so on, then click [Next]. 1 Turn on your computer. Confirm the set up according to your • The display settings should be 1024 . 768 preferences. dots or higher and 32000 colors or higher. 6 Confirm the preview of the Video CD 2 Insert the supplied CD-ROM into the file. CD-ROM drive. 1 Click the file you want to preview on 3 Double-click the CD-ROM icon. the left frame. 4 Copy the [IMXINST.SIT] file in the 2 Click [N] to preview the file. [MAC] folder to the hard disk icon. 7 Click [Next] and enter the disk name and 5 Double-click the [IMXINST.SIT] file in its destination. the copy-to folder. The preparation for storing the file on a 6 Double-click the [ImageMixer CD-R is completed. VCD2_Install] extracted file. • “ImageMixer VCD2” can create only the disk 7 After the user information screen image to store the image file on a CD-R in the appears, enter the desired name and video CD format. Toast by Roxio (not supplied) password. is required to create a video CD. The installation of the software starts. b Creating a video CD 1 Open the [ImageMixer] folder in [Application]. 2 Click [ImageMixer VCD2]. 3 Click [Video CD]. The video disc mode starts up. • You cannot create a DVD Video. 4 Select the folder in which the desired images are stored. 1 Select the desired folder on the left frame, then click [Add]. The selected folder moves to the right frame. 2 Click [Next]. 2 Should your camera still not work 3 Should your camera still not work Troubleshooting properly, press the RESET button properly, consult your Sony dealer or located inside the jack cover, then turn local authorized Sony service facility. If you have trouble with your camera, try on the camera again. (This will clear the the following solutions. date and time settings, etc.) 1 First, check the items on pages 93 to 101. If the LCD screen shows “C:ss:ss,” the self-diagnosis function is working. Please see page 104. RESET Battery and power Symptom Cause Solution The battery remaining indicator is incorrect. Or the sufficient battery remaining indicator is displayed but the power soon runs out. • You have used the camera in an extremely cold location. • The batteries are discharged. • The battery contacts or the terminals on the battery/“Memory Stick” cover are dirty. • The nickel-metal hydride batteries are exhibiting the “memory effect” (page 10). • When using nickel-metal hydride batteries, a mismatch has occurred in the remaining battery time information. • The batteries are dead (page 113). p See page 113. p Install charged batteries or replace with new ones (pages 11, 12). p Wipe any dirt off from them with a dry cloth. p To restore the batteries to their original condition, use them until they are drained before recharging them. p To restore the batteries to their original condition, use them until they are drained before recharging them. p Replace the batteries with new ones. The battery runs down too quickly. • You are using in an extremely cold location. • The nickel-metal hydride batteries are not charged enough. • The batteries are dead (page 113). p See page 113. p Fully charge the batteries (page 11). p Replace the batteries with new ones. Troubleshooting Symptom Cause Solution The power cannot be turned on. • The batteries are not installed properly. • The AC Adaptor (not supplied) is disconnected. • The batteries are discharged. • The batteries are dead (page 113). p Properly install the batteries (page 12). p Connect it securely to your camera (page 15). p Install charged batteries or replace with new ones (pages 11, 12). p Replace the batteries with new ones. The power turns off suddenly. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery (page 16). • The batteries are discharged. p Turn on the camera again (page 16). p Install charged batteries or replace with new ones (pages 11, 12). Shooting still images / movies Symptom Cause Solution The LCD screen is not turned on even when the power is turned on. • The power was turned off with the...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-P41 (2.63 mb)