Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
continued on the reverse Digital Still Camera Operating Instructions Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate volume) thoroughly, and retain it for future reference. Refer to “User’s Guide/Troubleshooting” (separate volume) Explains advanced techniques and what to do if you experience trouble with your camera. Read Thiis Fiirst DSC-S60/S80/ST80/S90 Checking the accessories supplied • Ni-MH battery charger BC-CS2A/CS2B (1) Power cord (mains lead) (1) (DSC-S90/S80) • Cyber-shot Station (DSC-ST80) –Cyber-shot Station CSS-SA (1) –A/V connecting cable (1) –USB cable (1) –AC Adaptor AC-LS5 (1) –Power cord (mains lead) (1) –Rechargeable battery pack (NPNH25) (1) –Operating Instructions “Cybershot Station” (1) • USB, A/V cable for multi-use terminal (1) (DSC-S90/S80/S60) • HR6 (size AA) Nickel-Metal Hydride batteries (2) (DSC-S90/S80) R6 (size AA) alkaline batteries (2) (DSC-S60) A “Memory Stick” is not supplied. The camera has the own internal memory (32 MB), however, purchase of a “Memory Stick” is recommended. • Wrist strap (1) • CD-ROM (Cyber-shot application software) (1) • Operating instructions for digital still camera “Read This First” (this manual) (1) • Operating instructions “User’s Guide/ Troubleshooting” (1) Notes before use • Charge the supplied batteries before using the camera for the first time. (DSC-S90/S80/ST80 only) • The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. • Battery case (1) (DSC-S90/S80) Hook Prepare the battery For DSC-ST80, refer to the operating instructions “Cyber-shot Station”. • Connect the battery charger to an easily accessible wall outlet (wall socket) close by. • Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the Nickel-Metal Hydride batteries from the battery charger. • Time required to charge fully depleted Nickel-Metal Hydride batteries at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions. • The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction. Nickel-Metal Hydride battery Charging time NH-AA-DA.2 (supplied with DSC-S90/S80) Approx. 6 hours 1 Battery charger 2 Connect the power code (mains lead). 3 To wall outlet (wall socket) Power cord (mains lead) 1 Insert the batteries. CHARGE lamp Light on: Charging Light off: Completed (Remove the batteries.) Match 3/# and insert. DSC-S90/S80 only Available batteries You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/R6 (size AA) alkaline batteries/battery pack NP-NH25/ZR6 (size AA) Oxy Nickel Primary Battery. t “User’s Guide/Troubleshooting” (page 93) Using the AC Adaptor You can connect the camera using the AC-LS5K AC Adaptor (not supplied). t “User’s Guide/ Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor. To check the remaining battery time Press POWER to turn on and check the time on the LCD screen. To remove the batteries Hold the c...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-S60 (450.52 kb)
Kameras - DSC-S90 (450.52 kb)
Kameras - DSC-ST80 (450.52 kb)