Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Precaution for flash use When using a built-in camera flash, make sure to remove the lens hood. With certain of lens/flash combinations, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. Vignetting When you use lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. . Names of parts 1···Lens hood index 2···Focusing ring 3···Zooming ring 4···Focal-length scale 5···Focal-length index 6···Collar mounting index (red) 7···Lens index (gray) 8···Collar index (gray) 9···Lens contacts 10···Collar 11···Distance index 12···Distance scale 13···Focus-mode switch 14···Lens mounting index 15···DMF-mode switch 16···Focus-range limiter 17···Collar-locking knob 18···Focus-hold button . Attaching/detaching the lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. . You can attach/detach the lens front cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. . Do not press the lens release button on the camera when mounting the lens. . Do not mount the lens at an angle. To remove the lens (See illustration .–..) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Using the tripod When using a tripod, attach it to the-mounting collar of the lens, not to the tripod receptacle of the camera. To change vertical/horizontal position Loosen the collar-locking knob on the tripod-mounting collar (1) and rotate the camera either direction. The camera can be quickly switched between vertical and horizontal positions while maintaining stability when using a tripod. . Gray indexes (collar indexes) are located at 90° intervals on the tripod-mounting collar. Align a gray index on the tripod-mounting collar with the gray index (collar index) on the lens to adjust the camera position precisely (2). . Tighten the collar-locking knob firmly after the camera position is set. To detach the tripod-mounting collar from the lens The tripod-mounting collar can be detached from the lens when not using a tripod. 1 Remove the lens from the camera. . See “. Attaching/detaching the lens” for details. 2 Loosen the collar-locking knob (1). 3 Rotate the tripod-mounting collar to align the red index on the tripodmounting collar (collar mounting index next to SET/RELEASE) with the orange index on the lens (mounting index) (3). 4 Move the tripod-mounting collar towards the lens mount and detach the tripod-mounting collar from the lens (4). . Attaching lens hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Align the red line on the lens hood with the red line on the lens (Lens hood index). Turn the lens hood clockwise until the red line on the lens meets the red dot on the lens hood and it clicks into place (1). . The polarizing-filter window can be opened (2) to allow the rotation of the polarizing filter (sold separately) without having to remove the lens hood. Close the window when shooting. . Attach the lens hood properly. Otherwise, the lens hood may interfere with the desired effect or may appear in pictures. . When storing, turn over the lens hood and place it onto the lens backwards. . Zooming Rotate the zooming ring to the desired focal length. . . (1) (2) (3) (4) (1) (2) . ..... ..................(......).... .. . ........ AF(........) /MF(..........). .... AF(........:........) / MF(..... .....:...........)............. .......... AF........................AF.. ............................. ...MF....MF...... ....... ..............AF...MF....... .........(1). . MF............................... .....(2). AF/MF........................ . AF..MF......................AF..... AF/MF............... . MF..AF................MF........AF. ....AF/MF............... ...............(DMF) AF............................ ............MF................ .......(DMF).DMF...............2 .........DMF................. ............ ......DMF(STD.) AF........(AF-A)........AF(AF-S)..... ........................DMF... ........................ . ...........DMF.......:........ AF(AF-C)......./............/ AF-A.... ..2................ .....DMF(F TIME) AF......(AF-A/S/C)................. ............................. DMF.......................... ...... ........MF....... ........................(.)... ....................MF....... .............................. . ................. .............3............ AF...................AF....... ............................. ............................. ..............AF....... . ................................ .............................. . ........(AF....)..... . AF............