Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Kameras - DSC-TX100V (7.89 kb)
Kameras - DSC-TX100V (2.3 mb)
Anleitung Zusammenfassung
The number of still images may decrease depending on the conditions of use. • The number of still images that can be recorded is for shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately) – The battery pack is used at an ambient temperature of 25°C (77°F). – [GPS setting]: [Off] (DSC-TX100V only) • The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Panel Brightness] is set to [3]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies applies shooting under the following conditions: – Movie quality: AVCHD HQ – When continuous shooting ends because of set limits (page 22), touch (Movie button) again and continue shooting. Shooting functions such as the zoom do not operate. GB x Supplying power x Supplying power Notes GB • Power cannot be supplied when the battery pack is not inserted in the camera. • Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable. • If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen. Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. GB 13 3 3 • Closing the cover with the battery inserted incorrectly may damage the camera. x Memory cards that you can use Memory card For still images For movies A Memory Stick PRO Duo a a (Mark2 only) Memory Stick PRO-HG Duo a a Memory Stick Duo a — SD memory card a a (Class 4 or faster) B SDHC memory card a a (Class 4 or faster) SDXC memory card a a (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Duo” media, and products in B are collectively referred to as SD card. x To remove the memory card/battery pack Memory card: Push the memory card in once. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock Setting the clock ON/OFF (Power) Lens cover button 1 Lower the lens cover. The camera is turned on. The power lamp lights up only when the camera starts up. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select the desired area following the instructions on the screen, then touch [NEXT]. 4 Set [Daylight Savings] or [Summer Time], [Date & Time Format] and [Date & Time], then touch [NEXT]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Touch [OK]. 6 Select the desired display color and [GPS setting] (DSC-TX100V), following the instructions on the screen, then touch [OK]. • The battery pack will run out quickly if you set [GPS setting] to [On]. (DSC-TX100V only) 7 When an [In-Camera Guide] introductory message is appeared on the screen, touch [OK]. GB 15 Shooting still images/movies Shutter button Movie button Shooting still images/movies Shutter button Movie button 2 Press the shutter button fully down. Shooting movies 1 Touch (Movie button) to start recording. • Use the W/T (zoom) lever to change the zoom scale. 2 Touch (Movie button) to stop recording. Note • Continuous shooting is possible for approximately 29 minutes at one time at the camera’s default settings and when the temperature is approximately 25°C (77°F). When movie recording is finished, you can restart recording by touching (Movie button) again. Recording may stop to protect the camera depending on the ambient temperature. GB Viewing images (Playback) Viewing images (Playback) GB 1 Press the (Playback) button. • When images on a memory card recorded with other cameras are played back on this camera, the registration screen for the data file appears. x Selecting next/previous image Touch (Next)/ (Previous) on the screen. • To play back movies, touch (Playback) in the center of the screen. • To zoom in, touch the image being played back. x Deleting an image 1 Touch (Delete) t [This Image]. x Returning to shooting images Touch . • You can also return to shooting mode by pressing the shutt...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-TX100 (2.79 mb)