Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Olympus, modell SP-820UZ

Hersteller: Olympus
Dateigröße: 1.82 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Dieses Gerät hat auch andere Anweisungen:

Kameras - SP-820UZ (2.14 mb)

Kameras - SP-820UZ (2.01 mb)

Kameras - SP-820UZ (2.22 mb)

Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. . We recommend that you take test shots to get accustomed to your camera before taking important photographs. . In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. Checking the contents of the box Digital camera Strap Lens cap and lens cap strap Four AA batteries USB cable (CB-USB8) OLYMPUS Setup CD-ROM Names of Parts Other accessories not shown: Warranty card Contents may vary depending on purchase location. 21 3 5 6 7 8 9 4 10 Arrow pad For FGH I, use the arrow F(up) pad to navigate menus, etc. H(left) I(right) 1 Microphone 2 AF illuminator/Self-timer lamp 3 Flash 4 Lens 5 Monitor 6 Rbutton (record movies) 7 q button (switching between shooting and playback) 8 Abutton (OK) 9 Arrow pad INFO button (changing information display) .button (erase) 10 .button G(down) 2 EN EN 3 1 Mode dial 2 Zoom lever 3 Shutter button 4 Indicator lamp 5 n button 6 Speaker 7 Tripod socket 8 Battery/card compartment cover 9 Battery/card compartment lock 10 Strap eyelet 11 Connector cover 12 Multi-connector 13 HDMI micro connector 1 2 3 4 5 13 12 10 11 6 10 7 8 9 Attaching the camera strap and lens cap 1 2 3 4 5 Pull the strap tight so that it does not come loose. • Attach the strap to the other eyelet in the same manner. Inserting and removing the battery and card 1 Follow Steps 1, 2 and 3 to open the battery/card compartment cover. Battery/card compartment lock Battery/card compartment cover Turn off the camera before opening the battery/card compartment cover. 2 Insert the batteries. When using the camera, be sure to close and lock the battery/card compartment cover. For the types of batteries that can be used, see “Battery Handling Precautions” (p. 65) If using rechargeable batteries, charge the batteries. 3 Insert the card straight until it clicks into place. Write-protect switch Always use SD/SDHC/SDXC cards or Eye-Fi card with this camera. Do not insert other types of memory cards. “Using the card” (p. 61) Do not touch the metallic parts of the card directly. To remove the card 1 2 Press the card in until it clicks and comes out slightly, then remove the card. 4 EN 4 Follow Steps 1, 2 and 3 to close battery/ card compartment cover. Slide the battery/card compartment lock from ) to = and ensure that the battery/card compartment cover is securely locked. Failure to do so may cause the battery/card compartment cover to open during shooting and the batteries to fall out, resulting in loss of image data. When to replace the batteries Replace the batteries when the error message shown below appears. Error message Battery Empty Flashes in red EN 5 Turning on the camera and making the initial settings When you turn on the camera for the first time, a screen appears enabling to set the language for the menus and messages displayed in the monitor, and the date and time. 1 After turning the camera on with the n button, select a language using FGHIand press the Abutton. 2 Use FGto select the year for [Y]. XMENUBackY/M/DYMDTime:..2012 Date and time setting screen 3 Press Ito save the setting for [Y]. 4 As in Steps 2 and 3, use FGHIto set [M] (month), [D] (day), [Time] (hours and minutes), and [Y/M/D] (date order), and then press the Abutton. For precise time setting, press the Abutton as the time signal strikes 00 seconds. 5 Use HIto select the [x] time zone and then press the Abutton. . Use FGto turn daylight saving time ([Summer]) on or off. SeoulTokyo’12.10.26 12:30 Summer XMENUBackY/M/DYMDTime--:..2012 6 EN Learning how to use the camera . Press the nbutton to turn on the camera and enter the standby mode. (Press the nbutton again to turn off the camera.) . Select the shooting mode, and press the shutter button to shoot a still image. . To shoot a movie, press the Rbutton. . Set the shooting functions using the function menu or the setup menu. . To view images, press the q button to switch to playback mode. . Set the playback functions using the setup menu. . To return to standby mode, press the q button again, or press the shutter button halfway down and then release it. . Press and hold the q button while the camera is turned off to start up the camera in the playback mode. . In this case, pressing the q button again sets the camera to the standby mode. EN 7 Shooting still images 1 Remove the lens cap. 2 Press the nbutton to turn on the camera. 3 Select the shooting mode. (p. 11) 4 Hold the camera and compose the shot. When holding the camera, take care not to cover the flash, microphone or other important parts with your fingers, etc. 5 Press the shutter button halfway down to focus. AF target mark Press halfway PF3.4F3.41/4001/400PP Shutter speed Aperture value The camera was unable to focus if the AF targ...