Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Press the k button to cancel picture upload and charge the battery. Picture Bank can be set so that it does not start automatically when the AC adapter is connected. See the Wireless LAN Connection Guide for more information about Picture Bank. 5 The battery begins charging. The power-on lamp (orange) will blink, and the battery will start charging. The power-on lamp (orange) stops blinking when charging is complete. A fully exhausted battery will recharge in about 150 minutes. 16 Charging the Battery Using the AC Adapter (COOLPIX S610c) The following chart explains power-on lamp status of the COOLPIX S610c while the AC adapter is connected. Power-on lamp Description Blinks (orange) Battery charging. On (orange) Battery fully charged. Off/Blinks (green)/ On (green) The camera is on. Turn the camera off when charging. Flickers (orange) • Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before use. • If the lamp flickers rapidly, the AC adapter is not correctly connected or there is a problem with the battery. Reconnect the AC adapter or replace the battery. 6 Disconnect the camera and AC adapter when charging is complete. Turn the camera off. Disconnect the AC adapter from the camera’s multi connector and unplug the power cable from the power outlet. C Note on the AC Adapter • Be sure to read and follow the warning for the AC adapter on page ii. • Be sure to read the section, “The Battery” (A119), thoroughly before use. • Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. • Do not connect the power cable supplied with the AC Adapter EH-63 to any other device. C The AC Adapter EH-63 The AC Adapter EH-63 (supplied) can: • When the camera is turned on, power the camera from a power outlet. • If you are using the COOLPIX S610c, the battery inserted into the camera is charged when the camera is turned off with the AC adapter connected. • If you are using the COOLPIX S610, the AC Adapter EH-63 is not supplied with the camera. Furthermore, the battery cannot be charged while it is inserted into the camera. • The AC adapter and the supplied audio/video cable or USB cable cannot be used at the same time. C The Battery Charger MH-65 If you are using the COOLPIX S610c, the Battery Charger MH-65 (A116), for charging a Rechargeable Li-ion Battery EN-EL12, is available separately. First Steps 17 Setting Display Language, Date, and Time A language-selection dialog is displayed the first time the camera is turned on. 1 Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. 2 Use the rotary multi selector to choose the desired language and press the k button. For information about using the rotary multi selector, see “The Rotary Multi Selector” (A9). 3 Choose Yes and press the k button. If No is selected, the date and time will not be set. Date Set time and date? No Yes 4 Press the rotary multi selector Jor Kto select your home time zone (A106) and press the kbutton. D Daylight Saving Time If daylight saving time is in effect, press the rotary multi selector H in the time zone selection screen displayed in step 4 to turn on the daylight saving time option. When the daylight saving time option is enabled, W is displayed at the top of the monitor. To turn off the daylight saving time option, press I. 18 w London Casablanca Back w London Casablanca Back First Steps Setting Display Language, Date, and Time 5 Edit the date. Rotate the rotary multi selector, or press Hor I, to edit the highlighted item. Press Kto move the highlight in the following order. D (day) . M (month) . Y (year) . hour . minute . DMY (the order in which the day, month, and year are displayed) Press Jto return to the previous item. First Steps EditDateDMY010000200801 6 Choose the order in which the day, month, and year are displayed and press the k button or the rotary multi selector K. The settings are applied and monitor display exits to shooting mode. EditDateDMY151015200811 D Changing the Date and Time • Select Date from the Date item (A104) in the setup menu (A101) to change the current date and time and follow the procedure described in step 5 above. • Select Time zone from the Date item in the setup menu to change the time zone and daylight saving time settings (A104). 19 Inserting Memory Cards Image, sound, and movie files are stored in the camera’s internal memory (approx. 45 MB) or on removable memory cards (available separately) (A116). If a memory card is inserted in the camera, data are automatically stored on the memory card and data recorded to the memory card can be played back, deleted, or transferred. Remove the memory card to store data in the internal memory, or play back, delete, or transfer data from the internal memory. 1 Confirm the power-on lamp and the monitor are off and open the battery-chamber/ memory card sl...
Dieses Handbuch ist für folgende Modelle:Kameras - COOLPIX S610 (3.55 mb)