Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Basic Camera Setup 153 Setup Menu w Electronic VR Basic Camera Setup Tap the bottom tab (A147) MTap z (Setup menu) Mw Electronic VR Choose whether or not to use electronic VR (vibration reduction), which reduces the effects of camera shake during shooting. Auto When taking still pictures, electronic VR is enabled when R (A10) is displayed in the monitor and all of the conditions below are met. • The flash is turned off or set to slow sync mode. • A slow shutter speed is used. • Continuous is set to Single. • The subject is dark. When recording movies, electronic VR is enabled at all times. Off (default setting) Electronic VR is disabled. B Notes on Electronic Vibration Reduction • The effectiveness of electronic VR decreases as camera shake increases. • The pictures taken using electronic vibration reduction may be somewhat “grainy” in appearance. • Electronic VR does not function under the following conditions or in the following shooting modes: -When slow sync with red-eye reduction (A64, 65) is used -When exposure exceeds a certain length of time -When ISO sensitivity (A53) is set to Auto -When Blink proof (A77) is set to On in smart portrait mode -In the following scene modes: Sports (A64), Night portrait (A64), Dusk/dawn (A66), Night landscape (A66), Museum (A68), Fireworks show (A68), and Backlighting (A69) • The angle of view (the area captured in the recorded movie) is smaller when electronic VR is enabled during movie recording. 154 Setup Menu U Motion Detection Tap the bottom tab (A147) MTap z (Setup menu) MU Motion detection Enable motion detection to reduce the effects of subject movement and camera shake when shooting still pictures. Auto (default setting) When the camera detects the subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring. However, motion detection does not function in the following situations. • Subject tracking is selected for the touch shooting setting • When the flash fires • When ISO sensitivity (A53) is set to Fixed range auto, or ISO sensitivity is fixed at a particular value in A (auto) mode • When Multi-shot 16 (A54) is selected • When Sports (A64), Night portrait (A64), Dusk/dawn (A66), Night landscape (A66), Museum (A68), Fireworks show (A68), or Backlighting (A69) scene mode is enabled Off Motion detection is not enabled. The current motion detection setting can be confirmed in the camera monitor with shooting (A10, 27). The motion detection icon turns green when the camera detects camera shake and increases shutter speed. When Off is selected, no icon is displayed. Basic Camera Setup B Notes on Motion Detection • Motion detection may be unable to completely eliminate the effects of subject movement and camera shake in some situations. • Motion detection may not function if the subject exhibits significant movement or is too dark. • The pictures taken using motion detection may be somewhat “grainy” in appearance. 155 Setup Menu hAF Assist Tap the bottom tab (A147) MTap z (Setup menu) Mh AF assist Enable or disable AF-assist illumination, which assists autofocus operation when the subject is dimly lit. Auto (default setting) AF-assist illumination will be used to assist the focus operation when the subject is dimly lit. The illuminator has a range of about 1.9 m (6 ft 3 in.) at the maximum wide- angle position and about 1.1 m (3 ft 7 in.) at the maximum telephoto position. Note that for some scene modes or focus areas, AF-assist illuminator may not light up. Off AF-assist illuminator does not light up. The camera may be unable to focus under dim lighting. Basic Camera Setup u Digital Zoom Tap the bottom tab (A147) MTap z (Setup menu) Mu Digital zoom Enable or disable digital zoom. On (default setting) When the camera is zoomed in to the maximum optical zoom position, rotating the zoom control to g(i) triggers digital zoom (A29). Off Digital zoom will not be activated (except during movie recording). B Notes on Digital Zoom • When digital zoom is in effect, the camera focuses at the center of the frame. • Digital zoom cannot be used in the following situations. -When Subject tracking is selected for touch shooting -When Scene auto selector, Portrait, Night portrait, or Pet portrait scene mode is selected -When smart portrait mode is selected -When Multi-shot 16 (A54) is selected 156 Setup Menu i Sound Settings Tap the bottom tab (A147) MTap z (Setup menu) Mi Sound settings Adjust the following sound settings. Button sound Select On (default setting) or Off. When On is selected, a beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on. Shutter sound Select On (default setting) or Off. No sound is played with shutter release when some features such as continuous shooting or BSS (best shot selector) are enabled, or when shooting in Pet portrait sc...