Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Choose Info and press the kbutton to print shooting information (shutter speed and aperture value) on all pictures in the print order. • Choose Done and press the kbutton to complete the print order. Pictures with the print orders are recognized by the w icon displayed in playback mode. Print order Done Date Info 15/05/201215/05/201215/05/2012 4/4/ 1321324/ 132 0004.JPG0004.JPG0004.JPG 15:3015:3015:30 B Notes on Printing Shooting Date and Shooting Information When the Date and Info options are enabled in the print order menu, shooting date and shooting information can be printed on pictures when a DPOF-compatible (F18) printer which supports printing of shooting date and shooting information is used. • Shooting information cannot be printed when the camera is connected directly to a printer, via the included USB cable, for DPOF printing (E30). •Date and Info are reset each time the Print order menu is displayed. • The date and time printed on the picture are the same as those set on the camera when the picture was taken. The date and time printed using this option are not affected if the camera’s Time zone and date setting is changed from the setup menu after the pictures are taken. 15/05/2012 C Deleting All Print Orders In step 1 of the print order procedure (E55), choose Delete print order and press the k button to delete the print orders for all pictures. C Print Date The shooting date and time can be imprinted on pictures at the time of shooting by using Print date (E79) in the setup menu. This information can be printed even from printers that do not support printing of the date and time. Only the date and time of print date on the pictures are printed, even if Print order is enabled with the date selected in the print order screen. C More Information See “Printing Images of Size 1:1” (A79) for more information. E56 The Playback Menu bSlide Show Press the c button (Playback mode) M d button (A13) MbSlide show View pictures stored in the internal memory or on a memory card in an automatic slide show. 1 Use the multi selector to choose Start, and press the k button. • To change the interval between pictures, choose Frame intvl, and press the k button, and then select the desired interval time before choosing Start. • To repeat the slide show automatically, enable Loop and press the k button before choosing Start. The check mark (w) is added to the loop option when enabled. 3s Slide show Pause Start Loop Frame intvl 2 The slide show begins. • Press the multi selector K to display the next picture, or J to display the previous picture. Press and hold K to fast forward, or J to rewind. • To exit partway or pause, press the kbutton. 3 Choose End or Restart. • After the last frame is played back or during playback pause, the screen shown on the right is displayed. Choose Gand press the k button to return to step 1. Choose F to play the slide show again. B Notes on Slide Shows • Reference Section Only the first frame of movies (A100) included in slide shows is displayed. • For sequences (E13) whose sequence display options are set to Key picture only, only the key picture is displayed. • Images captured using easy panorama are displayed full-frame when played in a slide show. They do not scroll. • Slide shows play for a maximum of about 30 minutes, even when Loop is selected (E84). E57 The Playback Menu dProtect Press the c button (Playback mode) M d button (A13) MdProtect Protect selected pictures from accidental deletion. In the image selection screen, choose a picture and set or cancel protection. See “The Image Selection Screen” (E59) for more information. Note, however, that formatting the camera’s internal memory or the memory card (E85) permanently erases the protected files. Protected pictures are recognized by the s icon in playback mode (A10). Reference Section E58 E59 The Playback Menu Reference Section The Image Selection Screen The image selection screen is displayed in the following menus. Only one image can be selected for some menu items, while for other menu items, multiple images can be selected. Follow the procedure described below to select images. 1 Rotate the multi selector, or press J or K to choose the desired image. • Rotate the zoom control toward g (i) to switch to fullframe playback mode, or f (h) to switch to 12 thumbnail display. • For functions for which only one image is selected, proceed to step 3. 2 Press H or I to select ON or OFF (or the number of copies). • When ON is selected, a check mark (y) is displayed with the image. Repeat steps 1 and 2 to select additional images. 3 Press the k button to apply the image selection. • With selections such as Selected images, the confirmation dialog is displayed. Follow the instructions on the screen. Functions for which only one image can be selected Functions for which multiple images can be selected • Playback menu: Rotate image (E60), Choose key picture (E63) • Setup menu: Select an image in Welcome screen (E74) • Playback menu: ...