Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
42 Switch to shooting mode A/D/y Press the shooting mode button to switch to the shooting mode selected in the shooting-mode selection menu. 8 C Viewing Pictures Pictures stored in the internal memory can only be viewed if no memory card is inserted. C Deleting the Last Picture Taken ErErase 1 image?ase 1 image?Erase 1 image? No Yes In shooting mode, press lto delete the last picture taken. Basic Photography and Playback: 25 Using the Flash The flash has a range of 0.5-4.0 m (19.7 in.-13 ft. 1.5 in.) when the camera is zoomed out all the way. With maximum optical zoom applied, the range is 0.5-2.0 m (19.7 in.-6 ft. 6.7 in.). U Auto Flash fires automatically when lighting is poor. V Auto with red-eye reduction Reduces “red-eye” in portraits (A27). W Off Flash will not fire even when lighting is poor. X Fill flash Flash fires when a picture is taken. Use to “fill-in” (illuminate) shadows and backlit subjects. Y Slow sync U(auto) is combined with slow shutter speed. Flash illuminates main subject; slow shutter speeds are used to capture background at night or under dim light. Setting the Flash Mode 1 Press m (flash mode). The flash menu is displayed. 2 Use the multi selector to choose the desired flash mode and press k. The icon for the selected flash mode is displayed at the top of the monitor. When U (auto) is applied, D is only displayed for five seconds. If a setting is not applied by pressing k within a few seconds, the selection will be cancelled. Flash mode Basic Photography and Playback: Easy Auto Mode 26 Using the Flash B The W(Off) Indicator Note the following when lighting is poor and the flash is off (W): • Place the camera on a flat, level surface or use a tripod (recommended). • The E symbol is displayed when the camera automatically increases sensitivity. Pictures taken when E is displayed may be slightly mottled. B Note on Using the Flash Basic Photography and Playback: When using the flash at a wide-angle zoom position, reflections from dust particles in the air may appear as bright spots in pictures. To reduce these reflections, set the flash to W (Off) or zoom in on the subject. CThe Flash Lamp The flash lamp indicates flash status when the shutter- release button is pressed halfway. • On: Flash will fire when picture is taken. • Blinks: Flash charging. Wait a few seconds and try again. • Off:Flash will not fire when picture is taken. After the picture is taken with flash, the monitor turns off and the flash lamp blinks until the flash is completely charged. You can set the monitor not to turn off automatically while the flash is charged (A91). CThe Flash Mode Setting The default setting is U (auto). (except for the one-touch portrait mode and a part of Scene mode) In any flash mode other than A (auto) mode, switching to another shooting mode or turning the Flash lamp camera off restores the default flash setting for all modes. C Red-eye Reduction The COOLPIX L14 is equipped with an advanced red-eye reduction system. Pre-flashes are fired several times at low intensity before the main flash, to reduce “red-eye.” If the camera detects “redeye” after a picture is taken, Nikon’s own In-Camera Red Eye Fix processes the image as it is recorded. Therefore, there is a slight delay before the shutter-release button operates normally to take another picture. Note the following when using red-eye reduction: • Not recommended for when shutter-release timing is essential. • It takes a longer time than usual to start the next shooting. • Red-eye reduction may not always produce the desired results. • In some rare cases, other portions of pictures may be affected. Use flash modes other than auto with red-eye reduction in above cases. 27 Taking Pictures with the Self-timer The camera is equipped with a ten-second timer for self-portraits. When using the self-timer, use of a tripod is recommended. 1 Press n(self-timer). The self-timer menu is displayed. 2 Use the multi selector to choose [ON] and press k. The self-timer icon (10 n) is displayed. If a setting is not applied by pressing kwithin a few seconds, the selection will be cancelled. Self-timer 3 Frame the picture and press the shutter-release button halfway. Focus and exposure will be set. 13 10 4 Press the shutter-release button the rest of the way down. The self-timer starts and the self-timer lamp will blink. The lamp stops blinking one second before the photograph is taken and remains lit until the shutter is released. The number of seconds remaining before the shutter is released is displayed in the monitor. To stop the timer before a picture is taken, press the shutter-release button again. 131313 101010 Basic Photography and Playback: Easy Auto Mode 28 Macro Mode Macro mode is used for taking pictures of objects as close as 10 cm (3.9 in.). Note that the flash may be unable to light entire subject at distances of less than 50 cm (1 ft. 7.7 in.). 1 Press p (macro mode). The macro menu is displayed. 2 Use the multi selector to choose [ON] and pr...