Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
44 Capturing Smiling Faces Automatically (Smart Portrait Mode) Changing the Smart Portrait Settings After displaying the F (smart portrait) mode shooting screen (A43), press the dbutton (A10) to set the following options in the smart portrait menu. • Use the multi selector to choose and apply settings (A9). • To exit the shooting menu, press the d button. Image mode Choose the image mode (combination of image size and compression rate) at which images are saved (A49). Changes made to the image mode setting apply to all shooting modes (except movie mode). Skin softening • On (default setting): When the shutter is released, the camera detects a human face (up to three faces) and softens skin tones through image enhancement before saving images. • Off: The skin softening function is set to Off. • Skin softening settings can be confirmed by the icon displayed on the shooting screen (A6). When Off is selected, no icon is displayed. The degree of skin softening effect cannot be confirmed on the subject on the shooting screen. View the image to confirm it after shooting. Blink proof When On is selected, the camera releases the shutter twice every time an image is captured and saves only one image in which the subject’s eyes are open compared to the other. • If an image in which the subject’s eyes may have closed is saved, the message on the right is A blink was detected in the picture just taken. displayed for a few seconds. • If On is selected, the flash is disabled. • The default setting is Off. • Blink proof settings can be confirmed in the monitor when shooting (A6). When Off is selected, no icon is displayed. More on Shooting 45 Auto Mode In A (auto) mode, macro mode (A47) and exposure compensation (A29) can be applied and pictures can be taken using the flash mode (A26) and self-timer (A28). Pressing the dbutton in A (auto) mode allows you to set the items in the shooting menu (A48) according to shooting conditions. 1 Press the A button. The shooting-mode selection menu will be displayed. 2 Press the multi selector Hor Ito choose A and press the kbutton. The camera enters A (auto) mode. Set the flash (A26), self-timer (A28), exposure compensation (A29) and macro mode (A47) Auto mode according to shooting conditions. By pressing the dbutton, you can also set the items in the shooting menu (A48) according to shooting conditions. 3 Frame the subject and shoot. Camera focuses on subject in center of frame. 88 D Focus Lock When the camera focuses on an object in the center of the frame, you can use focus lock to focus on an off-center subject. • Be sure that the distance between the camera and the subject does not change while focus is locked. • When the shutter-release button is pressed halfway, exposure is locked. F2.71/1251/125F271/125F2.7F2.788 More on Shooting Position the subject Press the Confirm that the Continue holding Press the in the center of the shutter-focus area is down the shutter-shutter- frame. release green. release button halfway release button button and recompose the the rest of the 46 halfway. picture. way down. Auto Mode Macro Mode Macro mode is used for taking pictures of objects as close as 3 cm (1.2 in.). Note that the flash may be unable to light entire subject at distances of less than 60 cm (2 ft.). When using A (auto) mode, follow the procedure below. Macro mode can also be used with some scene modes (A37, 38, 39). 1 Press p(macro mode) on the multi selector. The macro mode menu is displayed. 2 Press the multi selector Hor I to select ON and press the kbutton. The macro mode icon (F) is displayed. If a setting is not applied by pressing the kbutton within a few seconds, the selection will be cancelled. More on Shooting Macro mode 3 Rotate the zoom control until the zoom position reaches the position where F and the zoom indicator glow green. The closest distance at which the camera can focus varies depending on the zoom position. Use this mode in the zoom range where F or the zoom indicator glows green. The camera can focus on objects as close as about 10 cm (4 in.) at the widest zoom position, and as close as about 3 cm (1.2 in.) at the position where Gis displayed. C Autofocus When using macro mode, the camera focuses continuously until the shutter-release button is pressed halfway to lock the focus. A sound will be heard while the camera focuses. C The Macro Mode Setting • G (easy auto) mode: Changes to macro mode when the camera selects i. The macro mode button cannot be used. • Scene mode: Varies with the selected scene mode (A32). Macro mode is turned on when k Close-up or u Food is selected in scene mode. • F (smart portrait) mode: Macro mode cannot be used. • The macro mode setting applied in A (auto) mode is saved in the camera’s memory even after the camera is turned off. 47 Auto Mode More on Shooting Changing A (Auto) Mode Settings (Shooting Menu) While shooting in A (auto) mode (A46), the shooting menu contains the following options. Image mode A49 Choose the image mode...