Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Leaving the camera on can run down the battery and cause the low battery warning to appear. Turn off the camera whenever you are not using it. • The low battery warning indicates that the camera is about to turn off due to low battery power. Charge the battery as soon as possible. Leaving a low or dead battery in the camera can lead to battery leakage and data corruption. Appendix 166 . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. – Removing the battery or memory card while the camera is performing some operation – Removing the battery or memory card while the back lamp is flashing green after turning off the camera – Disconnecting the USB cable while communication is in progress – Using a battery that is low – Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen (page 183). Perform the action indicated by the message that appears. . Operating Environment • Operating Temperature Requirements: 0 to 40°C (32 to 104°F) • Operating Humidity: 10 to 85% (non condensation) • Do not place the camera in any of the following locations. – In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand – Near an air conditioner or in other areas subjected to extreme temperature or humidity – Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration . Condensation Sudden and extreme temperature changes, such as when the camera is moved from the outdoors on a cold winter day into a warm room, can cause water droplets called “condensation” to form on the interior and the exterior of the camera, which creates the risk of malfunction. To prevent condensation from forming seal the camera in a plastic bag before changing locations. Then leave the bag sealed to allow the air inside to naturally change to the same temperature as the air in the new location. After that, remove the camera from the bag and open the battery cover for a few hours. . Lens • Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera. Appendix 167 . Caring for your camera • Never touch the lens or flash window with your fingers. Finger smudges, dirt, and other foreign matter on the lens or flash window can interfere with proper operation of the camera. Use a blower or other means to keep the lens and flash window free of dirt and dust, and wipe gently with a soft, dry cloth. • To clean the camera, wipe it with a soft, dry cloth. . Old Rechargeable Battery Handling Precautions • Insulate the positive and negative terminals with tape, etc. • Do not peel the covering off of the battery. • Do not try to take the battery apart. . Charger Unit Handling Precautions - 0 Never plug the power cord into an outlet whose voltage rating is different from that marked on the power cord. Doing so creates the risk of fire, malfunction, and electric shock. 0 Take care to protect the power cord against damage and breaking. Never place heavy objects onto the power cord, or expose it to intense heat. Doing so can damage the power cord, creating the risk of fire and electric shock. 0Never try to modify the power cord, or subject it to severe bending, twisting, or pulling. Doing so creates the risk of fire, malfunction, and electric shock. 0Never plug in or unplug the power cord while your hands are wet. Doing so creates the risk of electric shock. 0Do not plug the power cord into an outlet or extension cord that is shared by other devices. Doing so creates the risk of fire, malfunction, and electric shock. 0 Should the power cord ever become damaged (to the point that internal wires are exposed or cut), immediately contact your original retailer or a CASIO authorized service center to request repair. Continued use of a damaged power cord creates the risk of fire, malfunction, and electric shock. • The charger unit becomes slightly warm during charging. This is normal and does not indicate malfunction. • Unplug the power cord from the power outlet when you are not using the charger unit. • Never use detergent to clean the power cord (especially the plug). • Never cover the charger unit with a blanket, etc. Doing so creates the risk of fire. Appendix 168 . Other Precautions The camera becomes slightly warm during use. This is normal and does not indicate malfunction. . Copyrights Except for your own personal enjoyment, unauthorized use of use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be rest...