Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• Only the frames of movies recorded on this camera can be used in a MOTION PRINT image. Other Playback Functions (PLAY) 95 Editing a Movie on the Camera (Movie Editing)Editing a Movie on the Camera (Movie Editing) Procedure [p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Editing The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie. Cut (To-Point Cut) } Cuts everything from the beginning of the movie up to the current location. Cut (Point-To-Point Cut) ~ Cuts everything between two points. Cut (From-Point Cut) . Cuts everything from the current location to the end of the movie. 1. Use [8] and [2] to select the editing method you want to use and then press [SET]. 2. Use [4] and [6] to scroll through the movie and search for the frame (point) from which or to which you want to cut the movie (the cut point). • You also can search for the cut location by playing back the movie and pressing [SET] to pause. During playback, you can press [4] or [6] to perform fast reverse or fast forward. Cut range (red) Other Playback Functions (PLAY) 96 3. When the frame where you want the cut point to be is displayed, press [2]. Cut (To-Point Cut) } While the frame you want the cut to be up to is displayed, press [2]. Cut (Point-To-Point Cut) ~ 1While the frame you want the first (From) cut to be is displayed, press [2]. 2While the frame you want the second (To) cut to be is displayed, press [2]. Cut (From-Point Cut) . While the frame you want the cut to be from is displayed, press [2]. 4. Use [8] and [2] to select “Yes” and then press [SET]. The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy... Please wait...” message disappears from the monitor screen. Note that a cut operation can take a long time if the movie being edited is long. IMPORTANT! • When you edit a movie, only the result is saved. The original movie is not retained. An editing operation cannot be undone. NOTE • A movie that is shorter than five seconds cannot be edited. • Editing of movies recorded with a different type of camera is not supported. • You will not be able to edit a movie if the amount of remaining memory capacity is less than the size of the movie file you want to edit. If there is not enough memory available, delete files you no longer need to free up more. • Splitting of a movie into two movies and splicing of two different movies into a single movie are not supported. • You also can start a movie editing operation while the movie you want to edit is playing back. Press [SET] to pause playback, and then press [2] to display the menu of editing options. Perform editing using the same procedures as described above. Other Playback Functions (PLAY) 97 Optimizing Image Brightness (Lighting) Optimizing Image Brightness (Lighting) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas in existing images. +2 Performs a higher level of brightness correction than the “+1” setting. +1 Performs brightness correction. Cancel Does not perform brightness correction. NOTE • Correcting the lighting when shooting produces better results (page 82). • Altering the lighting of an image causes the original image and the new (altered) version to be stored as separate files. • When you display an altered image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the image was altered. Using Red Eye Correction (Red Eye) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Red Eye Using the flash to shoot at night or in a dimly lit room can cause red spots inside the eyes of people who are in the image. This is caused when the light from the flash reflects off of the retina of the eye. Red eye correction corrects the eye colors of subjects to their normal colors when red eye occurs while using the flash. Correct Turns on red eye correction. Cancel Turns off red eye correction. NOTE • The original snapshot is retained in memory and not deleted. • Red eye correction may not be possible in the case of small faces or profiles. • Red eye correction may not produce the desired effect under certain conditions. Other Playback Functions (PLAY) 98 Adjusting White Balance (White Balance)Adjusting White Balance (White Balance) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. Daylight ¤ Outdoors, fair weather Overcast ' Outdoors, cloudy to rain, in tree shade, etc. Shade “ Very high temperature light, such as building shade, etc. Day White Fluorescent † White or daywhite fluorescent lighting, without suppressing color cast Daylight Fluorescent – Daylight fluorescent lighting, while suppressing color cast Tungs...