Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
NOTE • Pressing the shutter button while the REC menu screen is displayed will cancel the current menu operation and exit the menu screen. Advanced Settings 52 1. In the REC mode, press [MENU]. This will display the menu screen. 2. Use [4] and [6] to select the tab where the item you want to configure is located. 3. Use [8] and [2] to select the menu item you Example: want, and then press [6]. When “Focus” is selected on the “REC” 4. Use [8] and [2] to change the setting. tab Tabs 5. After the setting is the way you want, press [SET]. • Pressing [4] registers the selected setting and returns to the menu. • To configure settings on another tab after pressing [4] to return to the menu, use [8] to move the highlighting up to the tabs, and then use [4] and [6] to select the tab you want. . Menu Operations in This Manual Menu operations are represented in this manual as shown below. The following operation is the same one described under “Example Menu Screen Operation” on page 52. Settings Procedure[r] (REC) * [MENU] * REC Tab * Focus Use [4] and [6] to select the “REC” tab. Use [8] and [2] to select the “Focus” and then press [6]. Press [MENU]. Press [r] (REC). Advanced Settings 53 REC Mode Settings (REC) REC Mode Settings (REC) ProcedureSelecting a Focus Mode (Focus) [r] (REC) * [MENU] * REC Tab * Focus Settings Type of Shot Focus Mode Approximate Focus Range*1 Snapshot Movies Snapshot Movies Q Auto Focus General recording Automatic *2 Approximately 10 cm to 9 (infinity) (3.9" to 9) *2 . Macro Close ups Automatic Fixed focal Approximately 10 cm to 50 cm (3.9" to 19.7") Fixed distance *3, *5EPan Focus Shooting with a relatively wide focus range Fixed focal point point Fixed distance*3, *4 ) Infinity Scenery and other distant subjects Fixed Infinity W Manual Focus When you want to focus manually Manual Approximately 10 cm to 9 (infinity)*3 (3.9" to 9) *1 The focus range is the distance from the lens surface. *2 During movie recording, the Auto Focus mode is disabled. *3 The minimum changes along with the optical zoom setting. *4 The distance depends on shooting conditions, and appears on the monitor screen when the shutter button is half-pressed. Advanced Settings 54 *5 (m) Normal Macro Zoom Steps Close Up Telephoto Center distance Z1 (Wide) Approx. 0.71 (2.3') 9 0.30 (11.8") 2 Approx. 0.94 (3.1') 9 0.35 (13.8") 3 Approx. 1.33 (4.4') 9 0.40 (15.7") 4 Approx. 1.74 (5.7') 9 0.40 (15.7") 5 Approx. 1.95 (6.4') 9 0.40 (15.7") 6 Approx. 3.09 (10.1') 9 0.45 (17.7") 7 (Tele) Approx. 3.51 (11.5') 9 0.45 (17.7") NOTE • Above values are for reference only. For movie macro, the focus range is a few centimeters within the center distance. To focus with manual focus 1.On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary. 2.Watching the image on the monitor screen use [4] and [6] to adjust focus. • At this time the image that is within the boundary will enlarge and fill the monitor screen, which aids Yellow boundary in focusing. If you do not perform any operation for two seconds while the enlarged image is displayed, the screen in step 1 will re-appear. Advanced Settings 55 NOTE • An Auto Macro feature detects how far the subject is from the lens and automatically selects either Macro Focus or Auto Focus accordingly. • Use of the flash together with Macro Focus can cause the light of the flash to become blocked, which may result in unwanted lens shadows in your image. • Auto Macro can be used when recording snapshots only. • Whenever you perform an optical zoom operation while shooting with Auto Focus, Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell you the focus range, as shown below. Example: oo cm to 9 * oo is the actual focusing range value. • The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page 61) are disabled while Manual Focus is selected as the focus mode. Using Focus Lock Subject to be focused on “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. • To use focus lock, select “U Spot” for the Auto Focus area (page 60). 1. Align the monitor screen’s focus frame with the subject you want to focus on and then half-press the shutter button. Focus frame 2.Keeping the shutter button half-pressed (which maintains the focus setting), move the camera to compose the image. 3.When you are ready to shoot the image, press the shutter button the rest of the way down. NOTE • Focus lock also locks exposure (AE). Advanced Settings 56 ProcedureChanging the Focus Frame Shape (Focus Frame) ProcedureChanging the Focus Frame Shape (Focus Frame) [r] (REC) * [MENU] * REC Tab * Focus Frame You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame. Settings . . ™ ¬ . NOTE • Half-pressing the shutter button will cause the focus frame to change one of the...