Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Press the shutter button the rest of the way down. “O Intelligent” “I Spot” or “E Tracking” Focus frame Focus frame “E Multi” Focus frame IMPORTANT! •“E Multi” cannot be selected for the Auto Focus area while you are using Face Detection (page 41). •“E Tracking” cannot be selected for the Auto Focus area while you are using Auto Shutter (page 71). • Selecting “E Tracking” can cause vibration and noise to occur due to lens operation while tracking a subject. This does not indicate malfunction. Snapshot Tutorial 38 Specifying ISO Sensitivity (ISO) Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the sixth Control Panel option from the top (ISO Sensitivity). 3. Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions ISO 64 Lower sensitivity Higher sensitivity Slow shutter speed Fast shutter speed (Set for shooting in dimly lit areas.) Less noise Some coarseness (increased digital noise) ISO 100 ISO 200 ISO 400 ISO 800 ISO 1600 • “AUTO” ISO sensitivity always is applied for movies, regardless of the current ISO sensitivity setting. • Higher ISO sensitivity values tend to result in digital noise in images. Using the easy Mode The easy mode eliminates troublesome setups and simplifies snapshot recording. This mode is recommended for those who are new to digital imaging. 1. In the REC mode, press [SET]. 2. Use [8] and [2] to select the third option from the bottom in the Control Panel (easy Mode). Snapshot Tutorial 39 3. Use [4] and [6] to select “| ON” and then press [SET]. This enters the easy mode. 4. Focus the image. While the focus frame is aligned with the subject, half-press the shutter button. 5. Shoot the image. When the image is focused, press the shutter button the rest of the way. This records the snapshot. . Using the easy Menu The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode. While the camera is in the easy mode, all the other settings (besides Flash, Self-timer, Image Size, and easy Mode) on the REC tab menu (page 163) and Quality tab menu (page 164) are fixed at preset optimum values. Any settings you configured on these tabs are not used in the easy mode. IMPORTANT! • To use the Set Up tab menu (page 165), you need to exit the easy mode. To do this, select the “easy Mode” item in step 2 of the following procedure, and then select l in step 3. After that, you can use the Set Up tab menu as you normally do. 1. Press [MENU]. The easy menu displays larger text than standard menus. 2. Use [8] and [2] to select the menu item you want, and then press [SET]. Snapshot Tutorial 40 3. Use [8] and [2] to select the setting you want, and then press [SET]. Menu Item: Available Settings: Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off) Self-timer • (10-second self-timer) / l* Image Size 1* / % / ! easy Mode k / l* Exit Menu Exit the easy menu • An asterisk (*) indicates reset default settings. • See the following for details. – Flash (page 34) – Self-timer (page 70) – Image Size (page 30) • The following are the settings you can select for “easy Mode”. To do this: Select this setting: Stay in the easy mode, without switching to another recording type k Switch from the easy mode to a standard recording type l • On-screen pop-up help text provides a brief explanation of each setting. Using Face Detection (Face Detection) When shooting people, the face detection feature detects the faces of up to ten individuals and adjusts focus and brightness accordingly. 1. In the REC mode, use [4] and [6] to display G in the control panel, which enters the Face Detection. •If G does not appear in the control panel, press [4] or [6] many times until it appears. Each press of [4] or [6] will cycle the control panel option in the following sequence: Face Detection * Make-up Mode (page 43) * Landscape Mode (page 44). Snapshot Tutorial 41 2. Press [SET] and then use [8] and [2] to select the second Control Panel option from the bottom (Face Detection). 3. Use [4] and [6] to select “G Face Detection: On” and then press [SET]. 4. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one. 5. Half-press the shutter button. The camera will focus and the frames around the faces it focuses on will turn green. Face Detection icon 6. Press the shutter button the rest of the way down. Tips for Best Face Detection Results • The camera performs center focus if it cannot detect a face. • Always make sure that Auto Focus (AF) is selected as the focus mode when shooting with face detection. • Face detection may take a bit longer when you hold the camera sideways. • Detection of the following types of faces is not supported. – Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade – A profile or a face that is at an angle – A face that is ve...