Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
• The image transfer method and detailed image settings used depend on the Photo Transport settings. For details, see Photo Transport help (page 229). IMPORTANT! • The transfer operation converts screen captures to JPEG format. ¦ Photo Transport Setup and Help Clicking the Settings button will display a dialog box that you can use to configure image transfer settings, to specify the transfer method, etc. For detailed information about the setup, operational procedures, and troubleshooting, click the Help button. Viewing User Documentation (PDF Files) 1. Start up your computer, and place the bundled CD-ROM into its CD-ROM drive. • Normally, this should cause the menu screen to appear automatically. If your computer does not display the menu screen automatically, navigate to the CD-ROM on your computer and then double-click the “AutoMenu.exe” file. 2. On the menu screen, click the “Language” down arrow button and then select the language you want. 3. Click “Manual” to select it and then click “Camera”. IMPORTANT! • You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you do not already have Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the bundled CD-ROM. USING THE CAMERA WITH A COMPUTER 229 User Registration You can perform user registration over the Internet. To do so, of course, you need to be able to connect to the Internet with your computer. 1. Click the “Register” button. • This starts up your Web browser and accesses the user registration website. Follow the instructions that appear on your computer screen to register. Exiting the CD-ROM Menu On the CD-ROM menu, click “Exit”. Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. Objective OS Version Install this software: See page: • Viewing images on your Macintosh • Storing images on your Macintosh OS 9/OS X • USB driver not required. 231 Transfer of images from the camera and management of images on your Macintosh OS 9 • Use commercially available software. 235 OS X • Use iPhoto, which comes bundled with your operating system. 235 USING THE CAMERA WITH A COMPUTER 230 Viewing and Storing Images on a Macintosh You can view and store images (snapshot and movie files) on your Macintosh by connecting to the camera. Objective OS Version Install this software: See page: OS 9 • Movie file playback not supported. 236Play movies OS X • Movie file playback supported under OS X v10.3.9 or higher when QuickTime 7 or higher is installed. View the User’s Guide OS 9/OS X • Use Adobe Reader or Adobe Acrobat Reader, which comes bundled with your operating system. 236 IMPORTANT! •Connection is not supported to a Macintosh running Mac OS 8.6 or lower, or Mac OS X 10.0. Connection is supported to a Macintosh running Mac OS 9 or OS X (10.1, 10.2, 10.3, 10.4) only. Use the standard USB driver that comes with the operating system for connection. ¦ Connecting the Camera to Your Macintosh the First Time 1. Make sure the camera’s battery is fully charged. 2. Turn on the camera, and then press [MENU]. • It makes no difference whether the camera is in the REC mode or the PLAY mode. USING THE CAMERA WITH A COMPUTER 231 3. Select the “Set Up” tab, select “USB”, and then press [..]. 4. Use [..] and [..] to select “Mass Storage”, and then press [SET]. 5. Turn off the camera, and connect the USB cable that comes bundled with the camera to the camera’s USB/AV connector and your computer’s USB port. USB Port USB Cable Making sure that the ..mark on the camera is aligned with the .. mark of the USB cable plug, USB/AV connector connect the cable to the camera. • When connecting the bundled USB cable to the camera’s USB/AV port, insert the plug into the port until you feel it click securely into place. Failure to insert the plug fully can result in poor communication or malfunction of the connected components. • Some metal of the plug is visible even when the plug is inserted correctly. • Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning. 6. Turn on the camera. USING THE CAMERA WITH A COMPUTER 232 Camera-Macintosh Connection Pressing the camera’s [ON/OFF] button puts it into the USB mode, which is indicated by the camera’s operation lamp lighting green. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive. The appearance of the drive icon depends on the Mac OS version you are using. From now on, you will not have to perform steps 3 through 5 in the above procedure when you connect the camera to your Macintosh (unless you change the camera’s USB settings for some reason). IMPORTANT! • Never disconnect the USB cable without exiting the USB mode first. Doing so can corrupt image data. See “Disconnect ...