Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• The startup image is deleted if you format built-in memory (page 164). Specifying the File Name Serial Number Generation Method Use the following procedure to specify the method for generating the serial number used for file names (page 154). 1. Press [MENU]. 2. Select the “Set Up” tab, select “File No.”, and then press []. 3. Use [] and [] to change the setting, and then press [SET]. To do this for a newly saved file: Select this setting: Store the last file number used and increment it, regardless of whether files are deleted or whether the memory card is replaced with a new one. Continue Restart the serial number from 0001 whenever all files are deleted or the memory card is replaced. Reset 162 OTHER SETTINGS Setting the Clock Use the procedures in this section to select a Home Time Zone, and to change its date and time settings. If you want to change the time and date setting only without changing the Home Time Zone, perform the procedure under “To set the current time and date” (page 164) only. IMPORTANT! • Make sure you select your Home Time zone (the zone where you are currently located) before changing the time and date settings. Otherwise, the time and date setting will change automatically when you select another time zone. To select your Home Time zone 1. Press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. • This displays the current World Time zone. 3. Use [] and [] to select “Home”, and then press []. 4. Use [] and [] to select “City”, and then press []. 5. Use [], [], [], and [] to select the geographical area that contains location you want to select as your Home Time zone, and then press [SET]. 6. Use [] and [] to select the city you want, and then press [SET]. 7. After selecting the city you want, press [SET] to register its zone as your Home Time zone. 163 OTHER SETTINGS To set the current time and date 1. Press [MENU]. 2. Select the “Set Up” tab, select “Adjust”, and then press []. 3. Set the current date and the time. To do this: Do this: Change the setting at the current cursor location Press [] or []. Move the cursor between settings Press [] or []. Toggle between 12-hour and 24hour timekeeping Press [BS]. 4. When all the settings are the way you want, press [SET] to register them and exit the setting screen. Changing the Date Format You can select from among three different formats for display of the date. 1. Press [MENU]. 2. Select the “Set Up” tab, select “Date Style”, and then press []. 3. Use [] and [] to change the setting, and then press [SET]. Example: December 24, 2006 To display the date like this: Select this format: 06/12/24 YY/MM/DD 24/12/06 DD/MM/YY 12/24/06 MM/DD/YY 164 OTHER SETTINGS Using World Time You can use the World Time screen to select a time zone and instantly change the time setting of the camera’s clock when you go on a trip, etc. World Time lets you select one of 162 cities in 32 time zones. To display the World Time screen 1. Press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. 3. Use [] and [] to select “World”. To do this: Select this: Display the time in your home time zone Home Display the time in the zone currently selected on the World Time screen World 4. Press [SET] to exit the setting screen. To configure World Time settings 1. Press [MENU]. 2. Select the “Set Up” tab, select “World Time”, and then press []. 3. Use [] and [] to select “World”, and then press []. 4. Use [] and [] to select “City”, and then press []. • To configure the summer time setting, select “DST”, and then select either “On” or “Off”. • Summer time is used in some geographical areas to advance the current time setting by one hour during the summer months. • Use of summer time depends on the local customs and laws. 165 OTHER SETTINGS 5. Use [], [], [], and [] to select the geographical area you want, and then press [SET]. 6. Use [] and [] to select the city you want, and then press [SET]. 7. When the setting is the way you want, press [SET] to apply it and exit the setting screen. Editing the Date and Time of an Image Use the procedure in this section to change the date and time of a previously recorded image. This capability comes in handy when the current date and time are wrong due to the following reasons. • Because the camera’s clock settings were not configured correctly when the image was recorded (page 46) • Because the image was recorded using the wrong World Time zone (page 165) 1. In the PLAY mode, use [] and [] to display the image whose date and time you want to edit. 2. Press [MENU]. 3. Select the “PLAY” tab, select “Date/Time”, and then press []. 4. Set the date and the time you want. 166 OTHER SETTINGS Changing the Display Language To do this: Do this: Change the value at the cursor location Press [] or []. Move the cursor between settings Press [] or []. Toggle between 12-hour and 24hour timekeeping Press [BS]. 5. When all the settings are the way you want, press [SET] to apply them. • After editing th...