Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
IMPORTANT! • Note that file deletion cannot be undone. Once you delete a file, it is gone. Make sure you really do not need a file anymore before you delete it. Especially when deleting all files, make sure you check all the files you have stored before proceeding. • A protected file cannot be deleted. To delete a protected file, unprotect it first (page 106). • Delete cannot be performed when all the files in memory are protected (page 107). • Deleting an audio snapshot deletes both the image file and the audio file attached to it. Deleting a Single File Perform the following steps when you want to delete a single file. 1. In the PLAY mode, press [] ( ). 2. Use [] and [] to scroll through files and display the one you want to delete. 3. Use [] and [] to select “Delete”. • To exit the file delete operation without deleting anything, select “Cancel”. 4. Press [SET] to delete the file. • Repeat steps 2 through 4 to delete other files, if you want. 5. Press [MENU] to exit the menu screen. 103 DELETING FILES IMPORTANT! • If a file cannot be deleted for some reason, the message “This function is not supported for this file.” appears when you try to delete it. Deleting All Files The following procedure deletes all unprotected files currently in memory. 1. In the PLAY mode, press [] ( ). 2. Use [] and [] to select “All File Delete”, and then press [SET]. 3. Use [] and [] to select “Yes”. • To exit the file delete operation without deleting anything, select “No”. 4. Press [SET] to delete all the files. 104 FILE MANAGEMENT The file management capabilities of the camera make it easy to keep track of images. You can protect files against deletion, and even use its DPOF feature to specify images for printing. Folders Your camera automatically creates a directory of image storage folders in its built-in Flash memory or on the memory card. Memory Folders and Files An image you record is automatically stored in a folder, whose name is a serial number. You can have up to 900 folders in memory at the same time. Folder names are generated as shown below. Example: Name of the 100th folder. 100CASIO Serial number (3 digits) Each folder can hold files numbered up to 9,999. Trying to store the 10,000th file in a folder causes the next serially numbered folder to be created. Folder names are generated as shown below. Example: Name of the 26th file CIMG0026.JPG Extension Serial number (4 digits) • The actual number of files you will be able to store on a memory card depends on the image quality settings, capacity of the card, etc. • For details about the directory structure, see “Memory Directory Structure” on page 147. 105 FILE MANAGEMENT Protecting Files Once you protect a file it cannot be deleted (page 103). You can protect files individually or you can protect all files in memory with a single operation. To protect a single file 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Protect”, and then press []. 3. Use [] and [] to scroll through files and display the one you want to protect. 4. Use [] and [] to select “On”, and then press [SET]. • A file that is protected is indicated by the mark. • To unprotect a file, select “Off” in step 4, and then press [SET]. 5. Press [MENU] to exit the menu screen. 106 FILE MANAGEMENT To protect all files in memory 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “Protect”, and then press []. 3. Use [] and [] to select “All Files : On”, and then press [SET]. • To unprotect all files, press [SET] in step 3 so the setting shows “All Files : Off”. 4. Press [MENU] to exit the menu screen. DPOF Settings File Name, number of copies, DPOF The letters “DPOF” stand for “Digital Print Order Format”, which is a format for recording on a memory card or other medium which digital camera images should be printed and how many copies of the image should be printed. Then you can print on a DPOF-compatible printer or at a professional print service in accordance with the file name and number of copies settings recorded on the card. With this camera, you should always select images by viewing them on the monitor screen. Do not specify images by file name without viewing the file contents. date 107 FILE MANAGEMENT To configure print settings for a single image 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “DPOF”, and then press []. 3. Use [] and [] to select “Select images”, and then press []. 4. Use [] and [] to display the image you want. 5. Use [] and [] to specify the number of copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 6. To turn on date stamping for the prints, press [DISP] so 1212 1 is displayed. • To turn off date stamping for the prints, press [DISP] so 1212 1 is not displayed. • Repeat steps 4 through 6 if you want to configure other images for printing. 7. After all the settings are the way you want, press [SET] to apply them. 108 FILE MANAGEMENT To configure print ...