Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
You can tell if the image is in focus by checking the operation lamp and the focus frame color. Operation Lamp Focus Frame Status Operation Lamp Focus Frame Focusing Complete Lit Green Green Not Focused Flashing Green Red ADVANCED SETTINGS 122 2. When the image is focused, press the shutter button the rest of the way to shoot. IMPORTANT! • Auto Focus becomes fixed focus while shooting a movie. NOTE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera will switch to the Macro Focus range automatically (Auto Macro). • Whenever you perform an optical zoom operation while shooting with Auto Focus, a value will appear on the monitor screen as shown below to tell you the focus range. Example: cm – * will be replaced by the actual focus range value. Using Macro Focus 1. Half-press the shutter button to focus the image. The focus operation is the same as that for Auto Focus. 2. When the image is focused, press the shutter button the rest of the way to shoot. IMPORTANT! • Use of the flash along with Macro Focus can cause the light of the flash to become blocked, which can produce unwanted lens shadows in your image. • Macro Focus becomes fixed focus while shooting a movie. ADVANCED SETTINGS 123 NOTE • When Macro Focus cannot focus properly because the subject is too far away, the camera will switch to the Auto Focus range automatically (Auto Macro). • Whenever you perform an optical zoom operation while shooting with Macro Focus, values will appear on the monitor screen as shown below to tell you the focus range. Example: cm – cm * will be replaced by the actual focus range values. ADVANCED SETTINGS 124 Auto Focus and Macro Focus Shooting Tips Changing the Auto Focus Area Use the following procedure to change the metering area used for Auto Focus (AF). 1. In the REC mode, press [MENU]. 2. On the “REC” tab, select “AF Area” and then press [..]. When the shutter button is half-pressed, have the camera automatically select one or more of nine possible focus frames • If the camera is able to focus on multiple points, all applicable focus frames turn green. To do this: Multi Select this setting: 3. Use [..] and [..] to select the setting you want and then press [SET]. To do this: Select this setting: Half-pressing the shutter button focuses the subject and also starts a focus tracking operation that keeps the focus frame on the subject as it moves. Tracking Use a small area in the center of the screen for metering • This setting is best when you want to use focus lock (page 127). Spot ADVANCED SETTINGS 125 NOTE • When you select “ Multi” as the focus area, nine focus frames appear on the monitor screen. The camera will automatically determine the optimum focus frame(s), which will change to green on the monitor screen. Spot / Tracking Multi Focus Frame Focus Frame • “ Multi” cannot be used in the Face Recognition Normal mode or the Family First mode (page 87). • If you select “ Tracking” while using continuous shutter or self-timer, subject will be tracked until image recording starts. ADVANCED SETTINGS B 126 Using Focus Lock “Focus lock” is the name of a technique you can use when youwant to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. •Use focus lock with “ Spot” or “ Tracking” focus. 1.Align the monitor screen’s focus frame with the subject you want to focus on and then half-press the shutter button. 2.Keeping the shutter button half-pressed, re-compose the image as you like. •When “ Tracking” is selected as the Auto Focus area, the focus frame will move automatically and followthe subject. 3.When the image is focused, press the shutter button the rest of the way to shoot. NOTE•Focus lock also causes exposure (AE) to be locked. Subject to be focused on Focus Frame Using Focus Lock “Focus lock” is the name of a technique you can use when youwant to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. •Use focus lock with “ Spot” or “ Tracking” focus. 1.Align the monitor screen’s focus frame with the subject you want to focus on and then half-press the shutter button. 2.Keeping the shutter button half-pressed, re-compose the image as you like. •When “ Tracking” is selected as the Auto Focus area, the focus frame will move automatically and followthe subject. 3.When the image is focused, press the shutter button the rest of the way to shoot. NOTE•Focus lock also causes exposure (AE) to be locked. Subject to be focused on Focus Frame ADVANCED SETTINGS 127 Quick Shutter 4. Press the shutter button all the way down If you press the shutter button all the way without waiting for without pausing. Auto Focus while Quick Shutter is turned on, the camera will Pressing the shutter button all the way without pausing at record the image using a high-speed focus operation that is the halfway type will record with Quick Shutter, without much faster than nor...