Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
You can shoot with this feature to minimize the effects of camera movement when shooting with optical anti shake does not produce the desired results. 1. In the REC mode, set the mode dial to b. 2. Press [SET] and then select “Digital Anti Shake”. 3. When you are ready to shoot, press the shutter button all the way down. • After you press the shutter button all the way, the message “Busy... Please wait...” will appear on the monitor screen to indicate that recording is in progress. Keep the camera still while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • The CS dial setting is ignored when recording with this BEST SHOT scene. • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • Digital Anti Shake will not operate correctly while the camera is mounted on a tripod. Using BEST SHOT 70 Shooting with Digital Panning (Digital Panning) Shooting with Digital Panning (Digital Panning) When you point the camera at a moving object and pan as you press the shutter button, the camera will perform a continuous shutter operation, recording multiple images. Then it will automatically correct for blurring of the subject only in the recorded images and combine them into a single image that shows a clear subject on a blurred background. This feature lets you shoot powerful panning images simply by following the subject. 1. In the REC mode, set the mode dial to b. 2. Press [SET] and then select “Digital Panning”. 3. When you are ready to shoot, press the shutter button all the way down. • Lines will appear on the monitor screen, dividing it into nine areas. As you shoot, move the camera to keep the subject within the middle area as much as possible. NOTE • The CS dial setting is ignored when recording with this BEST SHOT scene. • Shooting with this BEST SHOT scene makes the shooting range narrower than normal. • Under certain lighting conditions, shooting with Digital Panning can result in overexposure. Using BEST SHOT 71 Shooting an Image in Accordance with Subject Movement(Move Out CS/Move In CS) Shooting an Image in Accordance with Subject Movement(Move Out CS/Move In CS) You can use these features to shoot an image automatically whenever the subject moves into or moves out of a frame on the monitor screen. You also can configure the camera to record images of what happened immediately before and after the subject moves. Move Out CS Automatically records what happened immediately before and after the subject moves outside of a boundary on the monitor screen. Move In CS Automatically records what happened immediately before and after the subject moves into a boundary on the monitor screen. . To setup the camera 1. In the REC mode, set the mode dial to b. 2. Press [SET] and then select “Move Out CS” or “Move In CS”. 3. Use [8] and [2] to select the fourth control panel option from the bottom (. Trigger Area Boudary), and then press [SET]. 4. Configure the boundary location and size settings. [8] [2] [4] [6] Moves the boundary. Control Dial Resizes the boundary. 5. Press [SET]. Boundary 6. Use [8] and [2] to select the third control panel option from the bottom (Trigger Sense). 7. Use [4] and [6] to select the subject movement sensitivity, and then press [SET]. • You can select any one of three sensitivity levels: “High”, “Normal”, or “Low”. • Move Out CS Setting Guide High : For a subject that moves out of the boundary quickly Low : For a subject that moves out of the boundary slowly • Move In CS Setting Guide High : For a subject that moves into the boundary quickly or for a small subject (relative to the boundary) Low : For a subject that moves into the boundary slowly or for a large subject (relative to the boundary) Using BEST SHOT 72 8. Use [8] and [2] to select the second control panel option from the bottom (Prerecord (Still image) Speed). 9. Use [4] and [6] to select the CS speed setting you want, and then press [SET]. • You select a value in the range of 1 frame per second to 60 frames per second for the CS speed. CS speed 10. Use [8] and [2] to select the bottom control panel option (Prerecord (Still image) Time). 11. Use [4] and [6] to specify the pre-record time, which is the amount of time before and after subject movement for which you want to record images. Number of pre-recorded images and recording time Auto shutter point Number of real-time recorded images and recording time • The approximate number of recordable Number of recordable CS images will appear on the monitor CS images screen. Remaining snapshot memory capacity Using BEST SHOT 73 . To shoot using Move Out CS 1. Compose the image so the subject is within the boundary on the monitor screen. 2. Half-press the shutter button. • The camera will adjust exposure and focus automatically. 3. When the boundary on the monitor screen turns green, press the shutter button the rest of the way down. At this time the camera will go into recording standby and start pr...