Stimmen - 2, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Caution Denotes the possibility of injury. • When holding the camera by the strap, be careful not to bang it, subject it to strong impacts or shocks, or let it get caught on other objects. This could lead to injury or damage the camera. • Be careful not to subject the screen to strong impacts. If the screen cracks, injury may result from the broken fragments. • When using the flash, be careful not to cover it with your fingers or clothing. This could result in burns or damage to the flash. • Avoid using, placing or storing the product in the following places: -Places subject to strong sunlight -Places subject to temperatures above 40 °C (104 °F) -Humid or dusty areas These could cause leakage, overheating or an explosion of the battery, resulting in electrical shock, fire, burns or other injuries. High temperatures may cause deformation of the camera or battery charger casing. Safety Precautions • Viewing images on the camera screen for prolonged periods may cause discomfort. Denotes the possibility of damage to the equipment. Caution • Do not aim the camera at bright light sources (such as the sun on a clear day). Doing so may damage the image sensor. • This camera cannot be used underwater at a depth greater than 10 m (33 ft.), or in hot springs and other mineralized waters. This may cause damage or water leakage. • When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera. This may cause the product to malfunction. • In regular use, small amounts of smoke may be emitted from the flash. This is due to the high intensity of the flash burning dust and foreign materials stuck to thefront of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from the flash to prevent heat build-up and damage to the unit. • Remove and store the battery when you are not using the camera. If the battery is left inside the camera, damage caused by leakage may occur. • Keep the covers closed when the camera is not in use. Storing the camera with the covers open may damage it if liquid or dust gets inside. • Before you discard the battery, cover the terminals with tape or other insulators. Contacting other metal materials may lead to fire or explosions. • Unplug the battery charger from the power outlet after charging is complete, or when you are not using it. • Do not place anything, such as cloth, on top of the battery charger while it is charging. Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire. • Do not place the battery near pets. Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or damage. • When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. • Do not attach any hard objects to the camera. Doing so may cause malfunctions or damage the screen. Initial Preparations Prepare for shooting as follows. Attaching the Strap Release Button Attach the strap. • After attaching the strap to the strap mount, insert the strap mount into the socket on the camera and turn until it clicks. • To remove the strap mount, hold the release button while turning the strap mount counterclockwise. ..To avoid dropping the camera, be sure to place the strap around your wrist when shooting. This camera will sink in water. ..When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash. Holding the Camera Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. Remove the cover. Insert the battery. • After aligning the • marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Initial Preparations CB-2LY CB-2LYE Charge the battery. • For CB-2LY: Flip out the plug ( ) and plug the charger into a power outlet ( ). • For CB-2LYE: Plug the power cord into the charger, then plug the other end into a power outlet. • The charging lamp turns orange and charging begins. • When the charging is finished, the lamp turns green. Remove the battery. • After unplugging the battery charger, remove the battery by pushing it in ( ) and up ( ). • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see “Specifications” (p. 29). Initial Preparations Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (s...