Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
98) Photo Effect (p. 97) Compression (p. 62) Resolution (pp. 62, 63) Low Battery (p. 25) Metering Mode (p. 90) Shooting Method (pp. 73, 76) Flash (p. 64) Shooting Mode (pp. 66, 78) Movie Recording (p. 78) Camera Shake Warning (p. 41) Spot AE Point Frame ( Mode) AF Frame (p. 85) Shots Remaining or Remaining Movie Time (sec.) Zoom Magnification* (p. 46) * (Red)* * * Auto Rotate (p. 99) * * Macro/Infinity (p. 68) AE Lock (p. 88) FE Lock (p. 89) AF Lock (p. 86) * * * Frame Rate (Movie) (pp. 63, 81) * * * Appears even if the LCD monitor is set to Standard (No Information). Zoom powers indicate the combined optical and digital amount of zoom. These figures appear when the digital zoom is activated. Playback Information–Standard (Playback Mode) Basic Functions Protection Status (p. 118) Compression (Still Images) (p. 62) Resolution (Still Images) (p. 62) Movie (p. 106) WAVE Format Sound (p. 113) File Number Shooting Date/Time Image Number Playback Information–Detailed (Playback Mode) Long Shutter Mode (p. 92) Shooting Mode (pp. 66, 78, 82) Exposure Compensation (p. 91) White Balance (p. 94) Photo Effect (p. 97) ISO Speed (p. 98) Resolution (Movies) (p. 63) Flash (p. 64) Metering Mode (p. 90) Movie Length Shown on Movie Files (p. 78) Histogram Macro/Infinity (p. 68) Frame Rate (Movie) (pp. 63, 81) 43 The following information may also be displayed with some images. A sound file in a format other than the WAVE format is attached or the file format is not recognized. JPEG file with format not conforming to Design rule for Camera File System Standards RAW format file File with unrecognized format Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera. Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 91). Sample Histograms Balanced Image Dark Image Bright Image . Using the Viewfinder The viewfinder can be used to conserve power by turning the LCD monitor off (p. 39) while shooting. Shows the center of the image Basic Functions Viewfinder Image Seen in Viewfinder vs. Recorded Image Usually the recorded image contains more of the scene than is seen in the viewfinder. Confirm the actual image size with the LCD monitor. The image recorded may differ from what is seen in the viewfinder due to the distance between the viewfinder and lens (especially with close-ups). If you use the viewfinder to take close-up shots, portions of the close-up subject may not appear in the recorded image. Use the LCD monitor when taking close-up shots. About the Autofocus Function This camera employs AiAF (artificial intelligence autofocus) technology which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly off-center. The AiAF function can be turned off so that the autofocus is metered from a fixed AF frame at the center of the field (p. 85). 45 Using the Zoom The zoom can be adjusted from 35 mm to 105 mm in 35mm film equivalent terms. Telephoto/Wide Angle 1 Press the zoom lever toward or . • Press the zoom lever toward to zoom in (telephoto). • Press the zoom lever toward to zoom out (wide angle). Digital Zoom When the LCD monitor is on, you can shoot with a combined optical and digital zoom up to approximately 11x with the PowerShot SD300 DIGITAL ELPH/DIGITAL IXUS 40 and 10x with the PowerShot SD200 DIGITAL ELPH/ DIGITAL IXUS 30 (p. 72). The digital zoom is unavailable in some modes (p. 176). Images become coarser the more they are digitally zoomed. Pressing the Shutter Button The shutter button features a two-stage action. 1. Pressing Halfway Pressing halfway automatically sets the exposure, focus and white balance. Indicators Press the shutter button halfway. ..Beep • Focused: 2 beeps • Focusing difficulty: 1 beep ..Indicator Status Upper Indicator • Green: Metering complete • Orange: Flash will fire • Blinking Orange: Camera shake warning/ Insufficient exposure Lower Indicator • Yellow: Macro mode/Infinity mode/AF lock (p.68, 86) • Blinking Yellow: Focusing difficulty* * Use the focus lock or AF lock to shoot when the indicator blinks yellow (p. 86). ..AF Frame Status (LCD Monitor On) AiAF On (p. 85) • Green Frame: Metering complete (focused AF frame) • No Frame: Focusing difficulty AiAF Off (p. 85) (Center AF Frame) • Green Frame: Metering complete • Yellow Frame: Focusing difficulty Basic Functions 47 2. Pressing Fully Pressing the shutter button down fully activates the shutter and causes the shutter sound to play. Press the shutter button full...