Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
..If the battery usage time has become considerably low despite wiping the terminals and charging them until the battery charger indicator remains lit, this may indicate that the batteries have reached the end of their lifespan. Replace them with new batteries. If you are purchasing new batteries, look for Canon AA-size NiMH batteries. ..Leaving batteries in the camera or charger may result in damage from battery leakage. When not in use, remove the batteries from the camera or charger and store them in a cool, dry location. Appendix 109 ..It takes approximately 4 hours 40 minutes for the charger to fully recharge the batteries after they have been fully discharged. When two batteries are placed on each side of the charger, recharging will take approximately two hours (as determined by testing at Canon facilities). Charge batteries in an environment where the temperature is in the range of 0 to 35°C (32 to 95°F). ..The charging time varies according to the ambient temperature and to the battery charge state. ..The battery charger may emit noise while charging. This is not a malfunction. ..Battery/Charger Kit CBK4-200 can also be used. Using the AC Adapter Kit ACK800 It is best to power the camera with AC Adapter Kit ACK800 (sold separately) when you are using it for long periods of time or connecting it to a computer. Turn the camera power off before connecting or disconnecting the AC adapter. 1 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. 2 Open the terminal cover and attach the cord to the DC IN terminal. Compact Power Adapter CA-PS800 Using the Lenses (Sold Separately) The camera supports use of the separately sold Wide Converter WC-DC58N, Tele-converter TC-DC58N and Close-up lens 250D (58mm). In order to attach these lenses, you also need to use the separately sold Conversion Lens Adapter LA-DC58G. ..When attaching the wide converter, tele-converter or close-up lens be sure to screw it on securely. If they come loose, they may fall from the lens adapter, posing risk of injury from shattered glass. ..Never look into the sun or into strong light through the viewfinder, converter, tele-converter or close-up lens as this can result in blindness or impairment of vision. ..If you use the flash when shooting with these attachments, the outer area of the recorded image (especially lower right corner) will come out relatively dark. ..When using the tele-converter, please set the focal length to the telephoto end. At other zoom settings, the image will appear as if its corners have been cut off. ..When using the wide converter, please set the camera to the wide angle end. ..If you use the viewfinder for shooting, a portion of the view will be blocked by these attachments. Please use the LCD monitor. ..Wide Converter WC-DC58N Use this converter for taking wide-angle shots. The wide converter changes the focal length of the camera body’s lens by a factor of 0.7x (the thread diameter is 58 mm). ..Tele-converter TC-DC58N This lens is used for taking telephoto shots. The lens changes the focal length of the camera body’s lens by a factor of 1.75x. (the thread diameter is 58 mm) Appendix 111 Attach section Rear Front section Attach section Rear Front section . It is not possible to attach a lens hood or filter to the wide converter or tele-converter. ..Close-up lens 250D (58mm) This lens makes taking macro shots easy. In the normal mode, close-up shots can be taken when the distance from the front of the lens to the subject is 18 to 25cm (7.1 to 9.8 in.) at maximum telephoto. Shooting area (during macro mode) Distance from the front of the lens to the subject Shooting area Telephoto end 18 cm (7.1 in.) 36 X 27 mm (1.4 X 1.1 in.) ..Conversion Lens Adapter LA-DC58G This is a lens adapter required for attaching the wide converter, tele-converter and close-up lens. It can be separated into front and rear sections. ..To attach the wide converter WC-DC58N, or tele-converter TCDC58N. Detach the front section of the conversion lens adapter, and attach only the rear section to the camera. ..To attach the close-up lens 250D Attach the conversion lens adapter to the camera with the front and rear sections combined. Detach Attaching a Lens 1 Be sure that the camera is turned off. 3 When the 2 Press the ring release button and hold it down, and turn the ring in the direction of the arrow. Ring Release Button Ring mark on the camera and the mark on the ring are aligned, lift off the ring. 4 Detach the front section of the conversion lens adapter (p. 112). • When using the close-up lens, attach the conversion lens adapter to the camera with the front and rear sections combined. Appendix 113 5 Align the .. mark on the conversion lens adapter with the mark on the camera, and turn the adapter in the direction of the arrows as far as the .. mark on the camera. ..To remove the conversion lens adapter, turn the adapter in the opposite direction with holding down the ring relea...