Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
D B Display Indication Menu z Soft keys Shoot Mode Shoot. Tips z Display Indication Flash Mode/Red Eye Reduction GB Drive Mode Focus mode ±0.0 Flash compensation Metering Mode Focus area mode Face Detection Smile Shutter ISO AWB 7500K G9 White Balance Creative Style DRO/Auto HDR Display Indication Drive Mode Focus mode ±0.0 Flash compensation Metering Mode Focus area mode Face Detection Smile Shutter ISO AWB 7500K G9 White Balance Creative Style DRO/Auto HDR Display Indication Indication Smile detection sensitivity indicator Others GB Learning more about the camera (. Handbook) “. Handbook,” which explains how to use the camera in detail, is included on the CD-ROM (supplied). Refer to it for in-depth instructions on the many functions of the camera. x For Windows users 1 Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. 2 Click [Handbook]. 3 Click [Install]. 4 Start “. Handbook” from the shortcut on the desktop. x For Macintosh users 1 Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. 2 Select the [Handbook] folder and copy “Handbook.pdf” stored in the [GB] folder to your computer. 3 After copying is complete, double-click “Handbook.pdf.” GB Troubleshooting Troubleshooting 1 Check the items on pages 69 to 72. Also refer to “. Handbook” (PDF). 2 Remove the battery pack, wait for about one minute, reinsert the battery pack, then turn on the power. 3 Reset the settings (page 55). 4 Consult your Sony dealer or local authorized Sony service facility. Battery pack and power The battery pack cannot be installed. • When you insert the battery pack, use the tip of the battery pack to push the lock lever (page 17). • You can use an NP-FW50 battery pack only. Make sure that the battery is NP-FW50. The remaining battery indicator is incorrect, or sufficient remaining battery indicator is displayed but the power runs out too quickly. • This phenomenon occurs when you use the camera in an extremely hot or cold location. • The battery pack is discharged. Install a charged battery pack (page 16). • The battery pack is dead. Replace it with a new one. Cannot turn on the camera. • Install the battery pack correctly (page 17). • The battery pack is discharged. Install a charged battery pack (page 16). • The battery pack is dead. Replace it with a new one. Others The power turns off suddenly. • When the camera or battery pack is too warm, the camera displays a warning message and turns off automatically to protect the camera. GB • • The CHARGE lamp flashes when charging the battery pack. • You can use an NP-FW50 battery pack only. Make sure that the battery is NP-FW50. • If you charge a battery pack that has not been used for a long time, the CHARGE lamp may flash. • The CHARGE lamp flashes in two ways, fast (about 0.15-second intervals) and slow (about 1.5-second intervals). If it is flashing fast, remove the battery pack and reattach the same battery pack securely. If the CHARGE lamp flashes fast again, it suggests that there is something wrong with the battery pack. Slow flashing indicates that charging is suspended because the ambient temperature is outside the suitable range for charging the battery pack. Charging will resume and the CHARGE lamp will be lit when the ambient temperature returns to within the suitable temperature. Charge the battery pack under the suitable temperatures between 10 °C and 30 °C (50 °F and 86 °F). Shooting images Nothing is displayed on the LCD monitor when the power is turned on. • If you do not operate the camera for given period of time, the camera turns to power saving mode. To cancel the power save, operate the camera, such as pressing the shutter button halfway down. The shutter does not release. • You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. • Check the free capacity of the memory card. • You cannot record images while charging the flash. • The lens is not attached properly. Attach the lens properly (page 19). Recording takes a long time. • The noise reduction function is turned on. This is not a malfunction. • You are shooting in RAW mode. Since the RAW data file is large, the RAW mode shooting may take time. • The Auto HDR is processing an image. GB The image is out of focus. 70 • The subject is too close. Check the minimum focal distance of the lens. • • • Ambient light is insufficient. • The subject may require special focusing. Use the [Flexible Spot] or manual focus function. The flash does not work. • Raise the flash (page 23). • The flash is not attached correctly. Reattach the flash (page 23). • You cannot use a flash with the following shooting mode: – [Bracket: Cont.] – [Sweep Panorama] – [Night View] and [Hand-held Twilight] in [Scene Selection] – [Anti Motion Blur] – Movie recording Fuzzy white circular spots appear on images shot using the flash. • Particles (dust, pollen, etc.) in the air reflected the flash light and ...
Dieses Handbuch ist für folgende Modelle:Kameras - NEX-5 (6.22 mb)
Kameras - NEX-3A (6.22 mb)
Kameras - NEX-3D (6.22 mb)
Kameras - NEX-3K (6.22 mb)