Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
. 0 ■ ■ 1 ■ ■ 2+ □ EBS S (BULB) no BULB 3 While pressing the M button, rotate the control dial to adjust the aperture (F-number). 69 button Shooting images 4 Press the shutter button halfway down to adjust the focus. 5 Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Shooting techniques • Use a tripod. • Set the focus to infinity in manual focus mode when shooting fireworks, etc. • Use the Wireless Remote Commander (sold separately) (page 105). Pressing the SHUTTER button on the Wireless Remote Commander triggers BULB shooting and pressing it again stops BULB shooting. You do not need to press and hold the SHUTTER button on the Wireless Remote Commander. • If you use a Remote Commander that is equipped with a shutter button lock function (sold separately), you can leave the shutter open using the Remote Commander. Notes • When using a tripod, turn off the SteadyShot function (page 49). • The longer the exposure time, the more conspicuous the noise on the image. • After shooting, noise reduction (Long exp.NR) will be done for the same amount of time that the shutter was open. You cannot do any further shooting during the reduction. • When the Auto HDR function is activated, you cannot set the shutter speed to [BULB]. • If the Auto HDR function is used with the shutter speed set to [BULB], the shutter speed is temporarily set to 30 seconds. 70 Selecting the focus method There are two methods for adjusting the focus: autofocus and manual focus. Depending on the lens, the method for switching between the auto focus and manual focus is different. The type of lens The switch to be used To switch to auto focus To switch to manual focus The lens is equipped with a focus mode switch Lens (Always set the focus mode switch on the camera to AF.) Set the focus mode switch on the lens to AF. Set the focus mode switch on the lens to MF. The lens is not equipped with a focus mode switch Camera Set the focus mode switch on the camera to AF. Set the focus mode switch on the camera to MF. Using autofocus 1 Set the focus mode switch on the camera to AF. 2 When the lens is equipped with the focus mode switch, set it to AF. AF MF 1 iaj 111 (I )) yj? y 3 Look into the viewfinder. The subject overlaid onto the focus area comes into focus automatically (Eye-Start AF, page 73). 71 Using the shooting function 4 Press the shutter button halfway down to check the focus and shoot the image. • When the focus is confirmed, the focus indicator changes to Z or (below). • The sensor used for focusing in the AF area illuminated in red (page 75). Shooting technique • To select the AF area used for focusing, set up [AF area] (page 75). Focus indicator Focus indicator Status z lit Focus locked. Ready to shoot. lit Focus is confirmed. Focal point moves following a moving subject. Ready to shoot. lit Still focusing. You cannot release the shutter. z flashing Cannot focus. The shutter is locked. Subjects that may require special focusing Using the autofocus, it is hard to focus on the following subjects. In such cases, use the focus lock shooting feature (page 73) or manual focus (page 76). • A subject that is low in contrast, such as blue sky or a white wall. • Two subjects at different distances overlapping in the AF area. • A subject that is composed of repeating patterns, such as the facade of a building. • A subject that is very bright or glittering, such as the sun, the body of an automobile, or the surface of water. • Ambient light is not sufficient. AF area sensor Focus indicator 72 To measure the exact distance to the subject The -©- mark located on the top of the camera shows the location of the image sensor*. When you measure the exact distance between the camera and the subject, refer to the position of the horizontal line. * The image sensor is the part of the camera that acts as the film. Note • If the subject is closer than the minimum shooting distance of the attached lens, the focus cannot be confirmed. Make sure you put enough distance between the subject and the camera. To deactivate the Eye-Start AF function MENU button t O 1 t [Eye-Start AF] t [Off] • When using the camera with the FDA-M1AM Magnifier (sold separately), the FDA-A1AM Angle Finder (sold separately), or the FDA-ME1AM Magnifying Eyepiece (sold separately) attached, turn off both [Eye-Start AF] and [Auto off w/ VF] because these accessories cover the eyepiece sensors located above the viewfinder. Shooting with your desired composition (Focus-lock) 1 Place the subject within the AF area and press the shutter button halfway down. The focus and exposure are fixed. 73 Using the shooting function 2 Keep the shutter button halfway down, and put the subject back in the original position to recompose the shot. 3 Press the shutter button fully down to take the picture. Selecting the focus method to suit th...
Kameras - DSLR-A450L (6.85 mb)
Kameras - DSLR-A450Y (6.85 mb)