Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• Operations are not guaranteed when using a USB hub. • Operations are not guaranteed for all the recommended computer environments mentioned above. USB mode There are two modes for a USB connection when connecting with a computer, [Normal] and [PTP]* modes. The default setting is the [Normal] mode. This section describes the [Normal] mode as an example. * Compatible only with Windows XP. When connected to a computer, only the data in the folder selected by the camera is copied to the computer. To select the folder, follow the procedure on page 63. Communication with your computer When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time. When a USB connector is not provided on your computer When neither a USB connector nor a “Memory Stick” slot is provided, you can copy images using an additional device. See the Sony Website for details. Contents of the CD-ROM x USB Driver This driver is needed in order to connect the camera to a computer. When using Windows XP, you need not install the USB driver. x Picture Package This application is used to transfer images from the camera to a computer easily. It also allows you to utilize the various functions. When you install “Picture Package,” the USB driver will be installed at the same time. • The required operations may differ depending on your OS. • Close down all applications running on the computer before installing the USB driver and application. • When using Windows XP or Windows 2000, log on as Administrators. Installing the USB driver When using Windows XP, you need not install the USB driver. Once the USB driver is installed, you need not install the USB driver. a Turn on your computer, and insert the supplied CD-ROM into the CD-ROM drive. Do not connect your camera to your computer at this time. The install menu screen appears. If it does not appear, double-click (My Computer) t (PICTUREPACKAGE) in that order. • If you are going to use the “Picture Package” application software, click “Picture Package.” The USB driver will be installed when “Picture Package” is installed (page 92). • When the computer is in use, shut down all application software currently running before you install the USB driver. b Click [USB Driver] on the title screen. The “InstallShield Wizard” screen appears. c Click [Next]. The USB driver installation starts. When the installation is completed, the screen informs you of completion. d Click [Yes, I want to restart my computer now], then click [Finish]. Your computer restarts. Then, you can establish USB connection. e Remove the CD-ROM. Enjoying images on your computer Connecting the camera to your computer a Insert the “Memory Stick” with the images you want to copy into the camera. • Be sure to use fully charged nickel-metal hydride batteries or the AC Adaptor (not supplied). When you copy images to your computer using weak batteries, copying may fail or the data may be corrupted if the camera shuts off due to weak batteries. b Set the mode dial to and turn on the camera and your computer. c Connect the supplied USB cable to the (USB) jack of the camera. d Connect the USB cable to your computer. •When using a desktop computer, connect the USB cable to the USB connector on the rear panel. •When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 88. USB Mode Normal Switch on MENU Access indicators* “USB Mode Normal” appears on the LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the camera. Wait for a while. * During communication, the access indicators turn red. Do not operate the computer until the indicators turn white. • If “USB Mode Normal” does not appear in Step 4, press MENU, select [USB Connect], and set it to [Normal]. P Disconnecting the USB cable, removing the “Memory Stick,” or turning off the camera during a USB connection For Windows 2000, Me, or XP users 1 Double-click on the tasktray. Double-click here 2 Click (Sony DSC), then click [Stop]. 3 Confirm the device on the confirmation window, then click [OK]. 4 Click [OK]. Step 4 is unnecessary for Windows XP users. 5 Disconnect the USB cable, remove the “Memory Stick,” or turn off the camera. For Windows 98 or 98SE users Confirm that the access indicators (page 86) on the screen are turned white and carry out only Step 5 above. Copying images – Windows 98/98SE/2000/Me a Double-click [My Computer], then double-click [Removable Disk]. The contents of the “Memory Stick” inserted in your camera appear. • This section describes an example of copying images to the “My Documents” folder. • When the “Removable Disk” icon is not shown, see page 88. • When using Windows XP, see page 88. b Double-click [DCIM], then double-click the folder that the image files you want to copy are stored. c Right-click the image file to display the menu, th...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-P93 (3.1 mb)