Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
(Battery remaining indicator flashes.) • If the LCD screen display is off, set [DISPLAY] in [| I ] to [ON] with MENU and AfW on the control button to turn it on. • Based on the conditions under which the camera is being used and the state of the charge, or on the environment, this information may not be correctly indicated. • The battery remaining indicator is not displayed in USB connecting. 15 Getting started Inserting the batteries Open the battery/“Memory Stick” cover. Slide the cover in the direction of the arrow © while pressing OPEN. The battery/“Memory Stick” cover opens in the direction the arrow ©. 16 Insert the batteries. Match the +/- poles of the batteries to the +/- marks inside the battery case. • From time to time, use a dry cloth to wipe any dirt off of the battery terminals and the contacts inside the battery/ “Memory Stick” cover. Skin oil and other dirt on the battery terminals and contacts can significantly shorten the operating time provided by the batteries. Close the battery/“Memory Stick” cover. Close the battery/“Memory Stick” cover while holding the batteries in. Make sure the cover is closed securely. To remove the batteries Hold the camera with the battery/“Memory Stick” cover facing upward, open the cover, and remove the batteries. • Be careful not to drop the batteries when opening or closing the battery/“Memory Stick” cover. Battery life and number of images that can be recorded/viewed The tables show the approximate battery life and the number of images that can be recorded/viewed with a fully charged batteries at a temperature of 25°C (77°F), ($) (no flash) and auto adjustment mode. But the remaining indicator will decrease in the following situations: - The surrounding temperature is low - The camera has been turned on and off many times - [LCD LIGHT] is set to [ON] - The battery power is low - The battery capacity decreases as you use it more and more and as time passes (page 93). Shooting still images* Image size NH-AAA-DI (2) (supplied) LCD LIGHT Battery life (min.) No. of images 1280x960 (SXGA)** ON Approx. 60 min Approx. 1600 OFF Approx. 70 min Approx. 1800 640x480 (VGA)*** ON Approx. 60 min Approx. 1600 OFF Approx. 70 min Approx. 1800 * Shooting at about 2.5-second intervals ** SXGA: Abbreviation of Super extended Graphics Array; indicates an image size of 1280x960 *** VGA: Abbreviation of Video Graphics Array; indicates an image size of 640x480 Viewing still images** Image size NH-AAA-DI (2) (supplied) Battery life (min.) No. of images 1280x960 Approx. 120 Approx. 2400 640x480 Approx. 120 Approx. 2400 ** Viewing single images in order at about 3-second intervals with all indicators on and LCD LIGHT ON Shooting movies*** NH-AAA-DI (2) (supplied) Battery life (min.) Continuous recording LCD LIGHT ON Approx. 60 LCD LIGHT OFF Approx. 70 ***The maximum playing time is 15 seconds The battery life and number of images will be decreased when using the camera at low temperatures, using the flash or turning the power on/off repeatedly. 18 Using your camera abroad Power sources You can use your camera in any country or area with the supplied battery charger within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. [a] [b] • Do not use an electronic transformer (travel converter), as this may cause a malfunction. on/off your camera POWER Slide the lens cover in the direction of the arrow or press the POWER button. When you open the lens cover or press the POWER button, the power is automatically on. The POWER lamp (green) lights up. When you turn on your camera for the first time, the DATE NOTATION screen appears on the LCD screen (page 20). To turn off the power Slide the lens cover in the opposite direction of the arrow or press the POWER button again. The POWER lamp goes out, and the camera turns off. • If you open the lens cover too quickly, the camera might not turn on. If this happens, close the cover and then open it again more slowly. Auto power-off function If you do not operate the camera for about 3 minutes during shooting or viewing or when performing setup, the camera turns off automatically to prevent wearing down the battery. The auto power-off function also will not operate when a connector is plugged into the USB jack. Setting the date and time —► Slide the lens cover in the direction of the arrow or press the POWER button to turn on the power. The POWER lamp (green) lights up and the DATE NOTATION screen appears on the LCD screen. • This operation is available no matter what position the mode switch is in. • To change the date and time, press MENU and select [DATE&TIME SET] in [CLOCK SET] under [g] (page 89), then perform the procedure from step m 20 Select the desired date display format with AIT on the control button, then press EXEC. Select from [Y/M/D] (year/month/day), [M...