Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Step 2 Connecting your camera to your computer using the USB cable You can connect your camera to your computer after Windows is loaded. 1 Insert a floppy disk or a “Memory Stick” in your computer and setthe MS/FD selector in accordance with the media you haveinserted. 2 Connect the AC power adaptor to your camera and turn on your camera. 3 Use the supplied dedicated USB cable to connect the USB jack (mini-B) on your camera to the USB connector on your computer. Computer To the USB connector USB cable (supplied) To the USB jack Push the connector in as far as it will go. “USB MODE” appears on the LCD screen of your camera. When you connect the camera for the first time, the operation automatically starts to allow your computer to recognize the camera. Be sure to wait until the operation finishes. See “If theCopyWizardappears” (page 33) if you are using Windows XP. Cautions • If you connect your camera to a computer with two or more USB jacks, do not connect any other USB device excepting a keyboard and/or mouse. • If you have a desktop computer, use the USB jack on the rear panel of the computer. When you disconnect the USB cable from your computer, when you remove a floppy disk or a “Memory Stick” from the camera being connected to the computer using the USB cable, and when you switch the MS/FD selector For Windows 2000, Windows Me, and Windows XP users 1 Double-click the “Remove hardware” icon displayed at the lower right of the desktop screen. 2 Click “Sony DSC” and click “Stop.” 3 Confirm the drive to be removed and click “OK.” 4 Click “OK.” 5 Perform operations such as disconnecting the USB cable. For Windows 98 and Windows 98SE users Perform only step 5 above. B BBBB Playback 31 Step 3 Viewing images on Windows Step 3 Viewing images on Windows You can view the images recorded in your camera while the camera is connected to your computer. 1 Open “My Computer” on Windows and double-click the newly recognized drive “Removable Disk” (E:)*. The folder in a floppy disk or a “Memory Stick” is displayed. If “Removable Disk” is not displayed, see “If the Removable Disk does not appear” (page 33). . The drive symbol ((E:), etc.) may differ depending on your computer. 2 Select an image file to be viewed from the folder and double-click the file. See “Image file storage destinations and image file names” (page 38) for further information. Viewing an image of a floppy disk Desired file type Double-click in this order E-mail image “E-mail” folder t Image file Other files Image file Viewinganimage of a “Memory Stick” Desired file type Still image Double-click in this order “Dcim” folder t “100msdcf” folder tImage file Moving image* “Mssony” folder t “Moml0001” folder tImage file* Clip Motion image “Dcim” folder t “100msdcf” folder tImage file E-mail image TIFF image (uncompressed) “Mssony” folder t “Imcif100” folder tImage file . Copying a file to the hard disk of your computer before viewing it is recommended. If you view the file directly from a floppy disk or a “Memory Stick,” the image may break off. To copy the image data to your computer Open a folder that contains the image data to be copied, and drag and drop the image data to the “My Documents” (example) folder. Caution If you copy an image with the same filename to the same folder in your computer, a confirmation message for overwriting the original image data will appear. If you want to delete the original image and copy an image you want to drag and drop, click “Yes.” If you want to keep the original image, click “No” and change the filename of the image you want to drag and drop. If the Copy Wizard appears (for Windows XP users) Use the following procedure to copy an image data from your camera to your computer. 1 Click “Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard,” andthenclick “OK.” 2 Follow the instructions displayed on the screen to copy an image. Select “My Documents” (example) as the copy destination. To copy another image, click “Finish”, disconnect the USB cable, and connect it again. Then, repeat the procedure in the Copy Wizard screen. If the Removable Disk does not appear Delete a driver registered unintentionally while your camera is connected to your computer. See “Step 2 Connecting your camera to your computer using the USB cable (page 30)” for the connecting method. Perform all steps below to install the USB driver properly. 1 Open “Device Manager” on your computer. For Windows 2000 users: Select “My Computer” t “Control Panel” t “System” open “Hardware” tab, andthenclick “Device Manager.” For Windows 98, Windows 98SE, Windows Me users: Select “My Computer” t “Control Panel” t “System” and click “Device Manager.” 2 Check whether a USB driver is already installed. 12 1 Click “Other Devices.” 2 Check for “ Sony DSC” or “ Sony Handycam” with a question mark. B BBBB Playback 33 3 If there is a device indicated with a question mark, delete it. 1 Click “ Sony DSC” or “ Sony Handycam”. 2 Click “Remove.” The...
Dieses Handbuch ist für folgende Modelle:Kameras - MVC-FD200 (4.35 mb)