Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
On Enlarges the indicators. Off Does not enlarge the indicators. Using the Setup screen For details on the operation t page 41 Internal Memory Tool This item does not appear when a “Memory Stick” is inserted in the camera. The default settings are marked with . Format Formats the internal memory. • Note that formatting irrevocably erases all data in the internal memory, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be erased Ready?” appears. 2 Select [OK] with v , then press z. The format is complete. For details on the operation t page 41 Memory Stick Tool This item appears only when a “Memory Stick” is inserted in the camera. The default settings are marked with . Format Formats the “Memory Stick”. A commercially available “Memory Stick” is already formatted, and can be used immediately. • Note that formatting irrevocably erases all data on a “Memory Stick”, including even protected images. OK See the following procedure. Cancel Cancels the formatting. 1 Select [OK] with v on the control button, then press z. The message “All data in Memory Stick will be erased Ready?” appears. 2 Select [OK] with v , then press z. The format is complete. Create REC. Folder Creates a folder in a “Memory Stick” for recording images. OK See the following procedure. Cancel Cancels folder creation. 1 Select [OK] with v on the control button, then press z. The folder creation screen appears. Create REC. Folder Creating REC. folder 102MSDCF Ready? OK Cancel 2 Select [OK] with v , then press z. A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder. • For details on the folder, see page 34. • When not creating a new folder, the “101MSDCF” folder is selected as the recording folder. • You can create folders designated up to “999MSDCF.” • Images are recorded in the newly created folder until a different folder is created or selected. • You cannot delete a folder with the camera. To delete a folder, use your computer, etc. • Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. • For more information, see “Image file storage destinations and file names” (page 58). Using the Setup screen For details on the operation t page 41 Change REC. Folder Changes the folder currently used for recording images. OK See the following procedure. Cancel Cancels changing the recording folder. 1 Select [OK] with v on the control button, then press z. The folder selection screen appears. Select REC. Folder Cancel OK Folder Name: 102 2/2 Created: No. Of Files: 2005 102MSDCF 0 111::05:34AM BACK/NEXT 2 Select the desired folder with b/B, and [OK] with v , then z. • You cannot select the “100MSDCF” folder as a recording folder. • You cannot move recorded images to a different folder. Copy Copies all images in the internal memory to a “Memory Stick”. OK See the following procedure. Cancel Cancels the copying. 1 Insert a “Memory Stick” having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v , then press z. Copying starts. Copying 102_COPY • Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining capacity, the batteries may run out, causing copying to fail or possibly corrupting the data. • You cannot copy individual images. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick” after copying, then execute the [Format] command in Internal Memory Tool (page 46). • You cannot select a folder copied on a “Memory Stick”. • The setting of (Print order) marks is not copied even when you copy data. For details on the operation t page 41 Setup 1 The default settings are marked with . Beep Selects the sound produced when you operate the camera. Shutter Turns on the shutter sound when you press the shutter button. On Turns on the beep/shutter sound when you press the control button/ press the shutter button. Off Turns off the beep/shutter sound. Language Selects the language to be used to display the menu items, warnings, and messages. Initialize Initializes the setting to the default setting. OK See the following procedure. Cancel Cancels the resetting. 1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v , then press z. The settings are reset to the default setting. • Make sure that the power is not disconnected during resetting. Using the Setup screen For details on the operation t page 41 Setup 2 2 The default settings are marked with . File Number Selects the method used to assi...