Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Viewing images on a TV screen , Connect the A/V multi cable (supplied) to the multi connector of the camera and the audio/video input jacks of the TV. Place the camera with the LCD screen facing upwards. If your TV has stereo input jacks, connect the audio plug (black) of the A/V multi cable to the left audio jack. • Turn off both your camera and the TV before connecting the camera and the TV with the A/V multi cable. 1 To multi connector A/V multi cable 2 TV/Video switch BACK/NEXT 10:30PM2005 1 1101-0002 VOLUME 3 VGA 60min 2/9101 , Turn on the TV and set the TV/ Video switch to “Video”. • The name and location of this switch may differ depending on your TV. For details, see the operating instructions supplied with the TV. , Set the mode dial to , and turn on the camera. Press b/B on the control button to select the desired image. • When using your camera abroad, it may be necessary to switch the video output signal to match that of your TV system (page 114). Viewing images on a TV screen PAL-M system If you want to view images on a TV screen, Brazil you need a TV with a video input jack and the A/V multi cable (supplied). PAL-N system The color system of the TV must match that Argentina, Paraguay, Uruguay of your digital still camera. Check the following lists: SECAM system Bulgaria, France, Guiana, Iran, Iraq, NTSC system Monaco, Russia, Ukraine, etc. Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica, Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela, etc. PAL system Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Holland, Hong Kong, Hungary, Italy, Kuwait, Malaysia, New Zealand, Norway, Poland, Portugal, Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, United Kingdom, etc. Viewing still images Deleting images , Set the mode dial to , and turn on the camera. Press b/B on the control button to select the image you want to delete. • Note that you cannot restore deleted images. 1 BACK/NEXT 10:30PM2005 1 1101-0002 2/9 VOLUME VGA 60min 101 2 Delete Exit VGA 60min 2/9101 BACK/NEXT 3 Delete Exit BACK/NEXT VGA 60min 2/9101 , Press (Delete). The image has not yet been deleted at this point. • You cannot delete the protected image (page 66). , Select [Delete] with v on the control button, then press z. The message “Access” appears, and the image has been deleted. To continue and delete other images Display the image to be deleted with b/B on the control button. Then, select [Delete] with v and press z. To cancel deleting Select [Exit] with V on the control button, then press z. 1 SelectExit All In This Folder 2 3 TO NEXT SELECT 1 SelectExit All In This Folder 2 3 TO NEXT SELECT Deleting images in index mode Delete Delete SelectExit All In This Folder Deleting still images , While an index screen , Select [Select] with b/B on the (page 37) is displayed, press control button, then press z. (Delete). • Note that you cannot restore deleted images. , Select an image you want to delete with v/V/b/B on the control button, then press z. The (Delete) indicator appears on the selected image. At this point, the image has not yet been deleted. Repeat this step for all of the images you want to delete. • To cancel a selection, select the image, then press z on the control button again so that the indicator disappears. Delete Exit OK Delete Exit OK 4 , Press (Delete) and select [OK] with B on the control button, then press z. The message “Access” appears, and the images with the indicator have been deleted. To cancel deleting Select [Exit] with b on the control button, then press z. To delete all the images in the folder Select [All In This Folder] with B on the control button in step 2, then press z. Select [OK], then press z. All of the unprotected images in the folder are deleted. To cancel deleting, select [Cancel], then press z. Formatting a “Memory Stick” 1 , Insert the “Memory Stick” you want to format into the camera. • The term “formatting” means preparing a “Memory Stick” to record images; this process is also called “initialization.” • The “Memory Stick” supplied with your camera and commercially available “Memory Stick” are already formatted, and can be used immediately. • When you format a “Memory Stick,” be aware that all data in the “Memory Stick” will be permanently erased. Protected images are also erased. , Set the mode dial to SET UP, and turn on the power. Deleting still images 2 POWER 3 Memory Stick Tool Format: Create REC. folder: Change REC. folder: OK Cancel 4 Format All data will be erased 60min Ready? OK Cancel 2 1 , Select (Memory Stick Tool) with v/V on the control button. Select [Format] with B, then press B. Select [OK] with v, then press z. To cancel the formatting Select [Cancel] with V on the control button, then press z. , Select [OK] with v on the control button, then press z. The message “Formatting” appears. When this message disappears, the format is complete. How to setup and ...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-P120 (2.7 mb)