Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Kameras - DMCLC20 (1.48 mb)
Kameras - DMCLC20 (1.75 mb)
Kameras - DMCLC20 (34.23 mb)
Anleitung Zusammenfassung
• Sand or dust may damage the digital camera or card. (Care should be taken when inserting and removing the card) When you use your digital camera on a rainy or snowy day or on a beach, make sure that no water enters the digital camera. • Water may cause the digital camera or card to malfunction. (Irreparable damage may occur) • If sea water splashes onto the digital camera, wet a soft cloth with tap water, wring it well, and use it to wipe the camera body carefully. Then, wipe it again thoroughly with a soft dry cloth. Do not use the digital camera for surveillance purpose or other business use. • If you use the digital camera for a long period of time, the internal temperature increases and, consequently, this may cause malfunction. • The digital camera is not intended for business use. Do not use benzine, thinner or alcohol for cleaning the digital camera. • The camera body may be deformed and the surface finish may peel off. • Before cleaning the camera, detach the battery. • Wipe the digital camera with a soft, dry cloth. To remove stubborn stains, wipe with a cloth that is soaked in a detergent diluted with water and afterward finish wiping with a dry cloth. • For storing or transporting the digital camera, place it in a bag or case lined with soft pads so as to prevent the coating on the camera body from being worn. After use, be sure to take the card out, and remove batteries. • If the batteries are left in the digital camera for a long time, the voltage drops excessively, and the batteries will not function even after they are recharged. . Optimal Use of Batteries • Do not throw batteries into fire because it may cause an explosion. Always keep the terminals of batteries clean. Prevent the terminals from getting clogged with dirt, dust, or other substances. If you drop the batteries accidentally, check to see if batteries body and terminals are deformed. Attaching a deformed battery to the digital camera may damage the camera. . Condensation When the condensation has taken place: Set the power switch to [OFF] and leave the digital camera in this condition for about 1 hour. When the camera becomes close to the ambient temperature, the fog disappears naturally. . Cautions for Storage Before storing the digital camera, take the card out and remove the batteries. Store all the components in a dry place with a relatively stable temperature. (Recommended temperature:59 to 77 F (15 to 25 oC), Recommended humidity:40 to 60 %) Digital camera • Wrap it with a soft cloth to prevent dust from getting into the camera. • Do not leave the camera in places that expose it to high temperature. Batteries • Extremely high or low temperatures will shorten the life of batteries. • If the batteries are kept in smoky or dusty places, the terminals may rust and cause malfunctions. • Do not allow the battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation, and if you touch the battery in this condition, you may be badly burned. • Store the batteries in a completely discharged state. To store the batteries for a long period of time, we recommend you charge them once every year and store them again after you completely use up the charged capacity. Card • When the card is being read, do not remove the card, turn off the power, or subject it to vibration or impact. • Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated. • Do not bend or drop the card. The card or the recorded content may be damaged. • After use, be sure to remove the card from the digital camera. • Do not touch the terminals on the back of the card with your fingers. Do not allow dirt, dust or water to enter it. . LCD Monitor/Viewfinder LCD monitor • In a place with drastic temperature changes, condensation may form on the LCD monitor. Wipe it with soft dry cloth. • If the digital camera is extremely cold when you turn the power on, the image on the LCD monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness. Extremely high precision technology is employed to produce the LCD monitor screen featuring a total of approximately 110,000 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture. Viewfinder • Do not direct the viewfinder or lens to the sun. Internal components may be seriously damaged. . SD Slide Show If setting the SD slide show with the [SD Viewer for DSC] which is in the supplied CD-ROM, when playing back, the message "START SD SLIDE SHOW ?" is displayed. Press 3/4 to select [YES] and press the [REVIEW/SET] button to start the SD slide show. . Folder Composition When a memory card with data recorded is inserted into a PC, the folders shown below will b...