Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
200 pictures Recording time Approx. 100 min Approx. 100 min Recording conditions by CIPA standard • CIPA is an abbreviation of [Camera & Imaging Products Association]. • Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on. • Using a Panasonic SD Memory Card (32 MB). • Using the supplied battery. • Starting recording 30 seconds after the camera is turned on. (When the Optical Image Stabilizer function is set to [On].) • Recording once every 30 seconds with full flash every second recording. • Changing the zoom magnification from Tele to Wide or vice versa in everyrecording. • Turning the camera off every 10 recordings and leaving it until the temperature of the battery decreases. Playback time Approx. 160 min (ENG) VQT3U37 15 About the Built-in Memory/the Card Built-in Memory About the Built-in Memory/the Card Built-in Memory • Memory size: Approx. 70 MB • The access time for the built-in memory may be longer than the access time for a card. Card The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.) Remarks SD Memory Card (8 MB to 2 GB) • Use a card with SD Speed Class. with “Class 4” or higher when recording motion pictures. • SDHC Memory Card can be used with SDHC Memory Card or SDXC Memory Card compatible equipment. • SDXC Memory Card can only be used with SDXC Memory Card compatible equipment. • Check that the PC and other equipment are compatible when using the SDXC Memory Cards. SDXC.html • Only the cards with capacity listed left can be used. SDHC Memory Card (4 GB to 32 GB) SDXC Memory Card (48 GB, 64 GB) . SD Speed Class is the speed standard regarding continuous writing. Check via the label on the card, etc. e.g.: • Please confirm the latest information on the following website. (This Site is English only.) Note • Keep the Memory Card out of reach of children to prevent swallowing. 16 VQT3U37 (ENG) Inserting and Removing the Card (optional)/the Battery Inserting and Removing the Card (optional)/the Battery • Check that this unit is turned off. • We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. • Always use genuine Panasonic batteries (DMW-BCG10PP). • If you use other batteries, we cannot guarantee the quality of this product. Battery: Being careful about the battery orientation, insert all the way until you hear a locking sound and then check that it is locked by lever A. Pull the lever A in the direction of the arrow to remove the battery. Card: Push it securely all the wayuntil you hear a “click” while beingcareful about the direction in which you insert it. To remove the card, push the card until it clicks, then pull the card out upright. B: Do not touch the connection terminals of the card. 1:Close the card/battery door. 2:Slide the release lever in the direction of the arrow. (ENG) VQT3U37 17 Setting Date/Time (Clock Set) Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. Turn the camera on. • Lower the lens cover. • When turning off the power, raise the lens cover. Touch [Clock Set]. Touch the items you wish to set (Year/Month/Day/Hours/ Minutes), and set using [3]/[4]. • Touch [ ] to cancel the date and time settings without setting a date and time. Touch [Set] to set. Touch [Set] in the confirmation screen. Changing the Clock Setting Select [Clock Set] in the [Rec] or [Setup] menu. • It can be changed in steps 3 and 4 to set the clock. 18 VQT3U37 (ENG) Taking 3D pictures Taking 3D pictures With the two lenses built into this unit, you can record 3D pictures. Set the 3D/2D switch to [3D]. 3D 2D Aim the AF area at the point you want to focus on. D Press the shutter button halfway to focus. A ISO sensitivity B Aperture value C Shutter speed • Be careful not to get too close tothe subject. AB C • Make sure that your fingers are notover either of the lenses. • The focus indication D (green) lights when the subject is focused. Press the shutter button fully (push it in further), and take the picture. • To achieve good a 3D effect, we recommend that you record with the distance to the subject set as follows. Outside this range, left-right distortion increases and may prevent the 3D effect being achieved at the edges of the image. – Approx. 90 cm (2.96 feet) (Wide)/Approx. 3.4 m (11.2 feet) (Tele) to ¶ Pay attention to the following points when 3D picture recording. • Where possible, record with the unit in a horizontal state. • Be careful not to get too close to the subject. • Be careful not to shake the camera while in a vehicle or walking. (ENG) VQT3U37 19 Recording 3D motion pictures Recording 3D motion pictures Set the 3D/2D switch to [3D]. Start recording by pressing the motion picture button. A Available recording time B Elapsed recording time • Release the motion picture button right after AC you press it....