Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Do not use the appliance on artificial hair. • When the appliance is connected to the power, never leave it unattended. • Always unplug the appliance after use. • Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid. • Do not wind the mains cord round the appliance. • If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • For additional protection, we advise you to install a residual current device (RCD) in the electrical circuit that supplies the bathroom. This RCD must have a rated residual operating current not higher than 30mA. Ask your installer for advice. • If the appliance overheats, it switches off automatically. Unplug the appliance and let it cool down for a few minutes. Before you switch the appliance on again, check the grilles to make sure they are not blocked by fluff, hair, etc. Noise Level: Lc = 85dB [A] Electromagnetic fields (EMF) This appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. 2 Introduction Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at The ActiveCare dryer has a unique and innovative new sensor technology called the TempPrecision sensor. This technology has been specifically designed to protect your hair from over-heating and is much gentler on the scalp than conventional dryers. The TempPrecision sensor is an infrared sensor, that measures the temperature of your hair while drying it and will ensure that it never overheats your hair and scalp. This gives advanced protection to the hair from overheating the hair and the scalp and therefore keeps your hair healthier and shinier. We’ve already turned the sensor on so you can enjoy maximum protection right from the start. 3 Dry your hair 1 Connect the plug to a power supply socket. • For precise drying, attach the nozzle () onto the hairdryer. The nozzle enables you to direct the airflow straight at the brush or comb with which you are styling your hair. • To enhance volume for curls and bouncy style, attach the diffuser () onto the hairdryer. To disconnect the attachment, pull it off the hairdryer. • You are recommended to use the styling nozzle () only for styling and use the Thermoprotect heat setting for this purpose. 2 Make sure the sensor switch () is on so that you are guaranteed to have protection from overheating the hair. 3 Adjust the airflow switch () and temperature switch () to suitable positions. switch settings function Temperature Quick dry Dry shower-wet hair quickly Thermoprotect Provides the optimal drying temperature and gives additional protection from overheating the hair Gently dry the hair Airflow Strong airflow and fast drying Gentle airflow and styling Switch »»The LED () will always light up when the sensor is switched on. 4 Press the cool shot button () for cool airflow to fix your style. 5 The appliance is equipped with ion function, which provides additional shine and reduces frizz. »»When the function is on, a special odor may be smelt. It is normal and caused by the ions which are generated. • To turn the ion function on or off, slide the IONIC switch () to or . »»If the function is on, the ion indicator lights up. After use: 1 Switch off the appliance and unplug it. 2 Place it on a heat-resistant surface until it cools down. 3 Clean the appliance by damp cloth. 4 Keep it in a safe and dry place, free of dust. You can also hang it with the hanging loop (). 5 Remove the concentrator or diffuser before you clean the appliance. 4 Guarantee and service If you need information e.g. about replacement of an attachment or if you have a problem, please visit the Philips website at or contact the Philips Consumer Care Center in your country.The phone number is in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country, go to your local Philips dealer. ©2011 Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change wi...