Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
(0.08 to 0.2 mm) 0.003 to 0.005 inches. (0.084 to 0.14 mm) Moisture Content: 4% to 6% by weight 4% to 6% by weight Fax messages can be received on Letter, Legal and A4 size paper. If you use legal or A4, change the Paper Size setting: (Menu, 1, 1) Loading Paper in the Paper Cassette 1 Pull the paper cassette completely out of the MFC. 2 Slide the paper width and length adjusters to the position for the paper size you are using. 2 - 6 ASSEMBLY AND CONNECTIONS 3 Fan the paper well. Load paper in the paper cassette. Maximum Paper Press down on the paper to Height flatten it in all four corners, Guide keeping the paper level below the guide. The cassette can hold up to 250 sheets of 20 lb (75g/m2) paper. 4 Slide the paper cassette into the MFC until it locks into place. Manual Feed Slot Use the manual feed slot to print or copy on envelopes, labels, transparencies, card stock or thicker paper: The manual feed slot is above the paper cassette. Load paper or envelopes one at a time. You do not have to remove paper from the paper cassette. You do not have to choose Manual Feed in the Setup dialog box of your printer driver. Insert the sheet of paper for Portrait (vertical) or Landscape (horizontal), with the side you wish to print on face up in the manual feed slot. 1 Align the paper at the center of the manual feed slot and insert the paper into the manual feed slot until the front edge of the paper touches the paper feed roller. 2 Adjust the paper guides to the width of the paper. Manual Feed Slot ASSEMBLY AND CONNECTIONS 2 - 7 Connecting the MFC 1 Connect the power cord. 2 Connect the telephone line cord. Connect one end of the telephone line cord to the line jack on the MFC and the other end to a modular wall jack. Telephone Line Cord Power Cord WARNING = The MFC must be grounded using a 3-prong plug. Since the MFC is grounded through the power outlet, protect yourself from potentially hazardous electrical conditions on the telephone line by keeping the power to your MFC on when you connect it to a telephone line. When you want to move your MFC, protect yourself by disconnecting the telephone line first, and then the power cord. Lightning and power surges can damage this product! We recommend that you use a quality surge protection device on the AC power line as well as on the telephone line, or unplug the lines during a lightning storm. Do not touch the rollers at the paper exit. 2 - 8 ASSEMBLY AND CONNECTIONS Connections Connecting an External Telephone Although your MFC does not have a handset, you can connect a separate telephone (or telephone answering device) directly to the MFC. Connect the modular plug on the telephone’s line cord to the jack labeled EXT. on the left side of the MFC. Whenever this phone (or TAD) is in use, the LCD shows TELEPHONE. Connecting an External TAD (Telephone Answering Device) Sequence You might choose to connect an answering system. However, when you have an external TAD on the same telephone line as the MFC, the TAD answers all calls. The MFC “listens” for fax calling (CNG) tones. If it hears them, the MFC takes over the call and receives the fax. If it doesn’t hear CNG tones, the MFC lets the TAD continue playing your outgoing message so your caller can leave you a voice message. The TAD must answer within five rings (the recommended setting is two rings). The MFC cannot hear CNG tones until the TAD has answered the call, and with five rings there are only 8–10 seconds of CNG tones left for the fax “handshake.” Make sure you carefully follow the instructions in this manual for recording your outgoing message. We do not recommend using the toll saver feature on your external answering machine if it exceeds five rings. If you do not receive all your faxes, you must reset your external TAD to four rings. Connections The external TAD must be plugged into the left side of the MFC in the jack labeled EXT. Your MFC cannot work properly if you plug the TAD into a wall jack. If You Subscribe to your Telephone Company’s Distinctive Ring Service: You may connect an external TAD to a separate wall jack only if you subscribe to your telephone company’s Distinctive Ring service, have registered the distinctive ring pattern on your MFC, use that number as a fax number and have set your MFC’s Receive mode to MANUAL. The recommended setting is three or four rings on the external TAD when you have the telephone company’s Distinctive Ring service. If You Do NOT Subscribe to Distinctive Ring Service: You must plug your TAD into the EXT. jack of your MFC. If your TAD is plugged into a wall jack, both your MFC and the TAD will try to control the phone line. (See illustration on page 2-10.) ASSEMBLY AND CONNECTIONS 2 - 9 Do not connect a TAD elsewhere on the same phone line. 1 Plug the telephone line cord from the wall jack into the left side of the MFC, in the jack labeled LINE. 2 Plug the telephone line cord from your TAD into the left side of the MFC, in the jack labeled EXT. (Make sure th...