Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Set Up the Machine Do You Have Everything? Before Setting Up the Machine Manuals for the Machine . Remove all shipping tape on the machine. . Always hold the bottom when you lift the machine. . The machine illustration may differ slightly from your machine. . Starter Guide (This Document): Machine set-up and software installation . Basic Guide: Basic features . Advanced Guide (in User Software CD): Advanced fax features, status monitor, and reports and lists . Software Guide (in User Software CD): Driver set-up and printing from a computer Assistance: If you have a problem with your machine and you cannot solve it by referring to the manuals listed above, please contact our Canon Authorized Service Facilities or the Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A.M. to 8:00 P.M. EST Monday through Friday and 10:00 A.M. to 8:00 P.M. on Saturday. .Machine .Cartridge .Power Cord .Telephone Cable .Destination Labels .Starter Guide .Basic Guide .User Software CD .Limited Warranty Notice .Cartridge Warranty Notice .Handset .Handset Cradle .Plugs with Pins 1 2 3 Install Cartridge 1 Remove the cartridge from the bag. Keep the bag for future use. CAUTION Do not open the drum protective shutter (A). 2 Gently rock the cartridge several times to distribute toner inside. 3 Pull out the seal completely. NOTE Do not pull out the seal at an angle. 4 Open the document feeder tray. 5 Open the cartridge cover by the notch (A). 6 Hold the cartridge by its handle (A). 7 Insert the cartridge in the machine as far as it will go. The arrow (A) on the cartridge should be facing away from you and pointing down. 8 Push down the cartridge to make sure it is properly set in the machine. 9 Close the cartridge cover. NOTE Be careful not to get your fingers caught. 10 Open the paper delivery tray (A) and the extension (B). A A A A A B 4 5 Load Paper Load Paper 1 Lift the paper stack cover and pull it out completely. NOTE Make sure the back end of the cover does not catch the front paper guide. 2 Pinch and slide the side paper guides to the size of paper. 3 Pull out the paper guide rail as far as it will go. 4 Fan the paper stack and even the edges. 5 Insert the paper stack print side up. NOTE Make sure the stack height does not exceed the limit mark (A). 6 Push back the paper guide rail to the front edge of paper. NOTE – If loading paper shorter than Letter, pinch and slide the front paper guide (A) to match the paper size. – If loading paper other than Letter, make sure to set the correct paper size in the machine. (See Chapter 3, “Print Media,” in the Basic Guide.) 7 Insert the paper stack cover. NOTE Make sure the back end of the cover does not catch and lower the scanning platform (A). 8 Pull out the document delivery tray (A) and the extension (B). Do not open or close the document delivery tray extension without extending the document delivery tray first. A5 B5 EXEC LTR LGL A4 A A A B A 6 7 Connect Telephone Cables and Install Handset Connect Telephone Cables Install Handset Connect the supplied telephone cable to the line jack (A) and the wall jack. Connect the handset cable to the handset jack (C). Connect any external device to the external device jack (B) if required. 1 Use a screwdriver to remove the covers on the left side of the machine. 2 Insert the plugs with pins (A) into the holes on the handset cradle. NOTE Do not insert the pins all the way into the plugs at this point. 3 Insert the plugs (with the cradle) into the holes on the machine. 4 Carefully push the pins into the plugs as far as they will go. 5 Place the handset on the cradle. 6 Hook the handset cable on the retainer (A) at the back of the machine to retain the slack. NOTE If using the handset or an external telephone, make sure to set the fax receive mode to