Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Brother Dateigröße: 1.01 mb Dateiname: 8452e178-df5e-4a07-a0ff-846a2df1fdab.pdf Unterrichtssprache:

1. Place the original. 2. Press the FAX button on the control panel. 3. Press the OPTION button. 4. Press the DIRECT TX button, set the other transmission conditions, then press the SET button. 5. Specify the remote Faxes. 6. Press the START button. The remote Fax is dialed immediately and communication is initiated. Page 11 • Receiving a FAX • Reception Modes Automatic Reception .. Faxes are automatically received during the incoming call. .. The line is designated for use exclusively by the Fax. Manual Reception .. Faxes are received when the user confirms the call on the telephone; press the MANUAL RECEIVE button in the advanced menu and then the START button. .. An external telephone is required (not available for the European version). Memory Reception .. This model of the copier automatically stores received originals in memory if an error (e.g. a paper jam or out of paper) occurs during reception and prevents the originals from being printed. After the trouble has been cleared, printing is automatically resumed. Memory Reception works in the following conditions: .. During copying .. During printing of received originals .. During printing of lists and reports .. When the digital copier has run out of paper .. When a paper jam occurs .. When the digital copier has run out of toner Mailbox Reception .. You can retrieve documents from mailbox hubs (confidential, bulletin board) that support the ITU-T Mailbox functions. Polling Reception .. Users request transmission from a remote Fax, and receive the original that is stored in the remote Fax’s memory. .. There are 2 types of polling RX: individual polling RX and multi-polling RX .. A password can be set. Page 12 • Receiving a FAX • Reception Settings There are two reception modes: Auto Reception and Manual Reception. AUTO Reception: Set this mode when the phone line is used exclusively for Faxing. The FAX automatically receives incoming originals. MANUAL Reception: Set this mode when the Fax is connected to a line also used exclusively for telephone calls. 1. Press the USER FUNCTIONS button on the control panel. 2. Press the ADMIN button, key in the administrator password (6 digits) and press the ENTER button. 3. Press the FAX button. 4. Press the INITIAL SETUP button. 5. Press the AUTO or MANUAL button to select the reception mode, and then press the ENTER button. Page 13 • Receiving a FAX (Cont’d.) • Reception Settings (Cont’d.) Manual Reception 1. When the bell rings, pick up the handset of an external telephone. If the incoming call is a telephone call, start talking with the other party. 2. If you hear a tone (Fax signal), press the FAX button on the control panel. 3. Press the ADVANCED button to enter the advanced menu, and then press the MANUAL RECEIVE button. 4. Make sure that “OFF HOOK RECEIVE” appears, press the START button and replace the handset. Page 14 Notes Page 15 ...

Herunterladen

Geben Sie zwei Ziffern: