Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Canon Dateigröße: 1.07 mb Dateiname: Unterrichtssprache:

1 to 99 minutes SETTINGS AND ACTIVITY REPORTS 8-3 RX SETTINGS Name Description Settings RX SETTINGS Name Description Settings ECM RX Enable/disable error correction during reception. ON/OFF FAX/TEL AUTO SW This feature is used to answer calls, and if no fax tone is detected, the fax rings to alert you of an incoming call. – RING START TIME Set the duration that the fax listens for a fax tone before starting to ring. 0 to 30 seconds F/T RING TIME Set the length of time the fax will ring to alert you of an incoming call. 10 to 60 seconds DEFAULT ACTION Select the action taken after the F/T RING TIME expires. DISCONNECT/ RECEIVE INCOMING RING Set the fax to ring when it receives a call. ON/OFF RING COUNT Set the number of incoming rings before the fax answers. 1 to 99 times MAN/AUTO SWITCH Determine if the fax switches to document receive mode after the fax rings for a specified time when the fax is in the manual receive mode. ON/OFF RING TIME Set the amount of time the fax will ring before switching to document receive mode. 1 to 99 seconds REMOTE RX Enable/disable remote receiving. ON/OFF REMOTE RX ID If you set REMOTE RX to ON, you can select the remote receiving ID. 00 to 99 MEMORY RX Turn on/off memory receiving of a document. ON/OFF PRINTER SETTINGS Name Description Settings RX REDUCTION Enable/disable reduction for received documents. ON/OFF FIXED REDUCTION Select the reduction rate. STANDARD/ A4>LTR/ LGL>LTR REDUCE DIMENSION Select reduction in height only or both width and height. VERTICAL ONLY/ HORIZ & VERTICAL PAPER SIZE Select the size of the loaded fax paper. A4/LGL/LTR SYSTEM SETTINGS SYSTEM SETTINGS Name Description Settings AUTO TEST PRINT Enable/disable auto test printing whenever the BJ cartridge is ON/OFF replaced. RX RESTRICTION Enable/disable the direct mail preventive function. ON/OFF RX CONDITION WITH SENDER INFO: The fax only receives documents with the TTI. WITH SENDER INFO/ REGISTERED SENDR REGISTERED SENDR: The fax only receives documents with the TTI. Also, the phone/fax numbers on the TTI must be registered under one-touch/coded speed dialing on your fax. DATE SETUP Set the date format. MM/DD/YYYY DD/MM YYYY YYYY MM/DD DISPLAY LANGUAGE Set the language of the LCD messages. ENGLISH/FRENCH/ SPANISH/GERMAN/ ITALIAN/DUTCH/ FINNISH/ PORTUGUESE/ NORWEGIAN/ SWEDISH/DANISH/ SLOVENE/CZECH/ HUNGARIAN/ RUSSIAN/POLISH TX START SPEED Set the speed at which the fax starts transmitting. Set this to a 14400bps/9600bps/ lower speed if you have difficulties connecting over long 7200bps/4800bps distance or noisy lines. RX START SPEED Set the speed at which the fax starts receiving. Set this to a 9600bps/7200bps/ lower speed if you have difficulties connecting over long 4800bps distance or noisy lines. SUMMER TIME Enable/disable the summer time system. ON/OFF BEGIN DATE/TIME Set the beginning of the summer time period. – END DATE/TIME Set the end of the summer time period. – MONTH: Set the beginning/end month. JANUARY/FEBRUARY/ MARCH/APRIL/MAY/ JUNE/JULY/AUGUST/ SEPTEMBER/ OCTOBER/ NOVEMBER/ DECEMBER WEEK: Set the beginning/end week. FIRST WEEK/SECOND WEEK/THIRD WEEK/ FOURTH WEEK/ LAST WEEK DAY: Set the beginning/end day of the week. MONDAY/TUESDAY/ WEDNESDAY/ THURSDAY/FRIDAY/ SATURDAY/SUNDAY TIME: Set the beginning/end time. – SETTINGS AND ACTIVITY REPORTS 8 8-5 TAM SETTINGS (FAX-B840 only) CALLER ID Name Description Settings MESSAGE LENGTH Set the maximum recording time for each recorded message. 0 seconds/30 seconds/60 seconds/ 120 seconds PASSWORD Set a four-digit PIN so that you can access the fax from remote locations. 0000 to 9999 TOLL SAVER Setting this feature to ON allows calls to be picked up after 2 rings when you have a new message. ON/OFF RING COUNT If you set TOLL SAVER to OFF, this feature allows you to set the number of times the fax rings. 1 to 15 times FWD SETTINGS Allows you to forward messages. ON/OFF FWD TEL NUMBER Forwarding telephone number. A maximum of 40 digits can be entered. – AUTO REDIAL Redial the previously dialed number. REDIAL TIMES: Set the number of retries. REDIAL INTERVAL: Set the period of time between redialing attempts. ON/OFF 1 to 2 times 1 to 99 minutes PIN ENTRY PIN confirmation. ON/OFF TAM MONITOR Allows you to screen all incoming calls. ON/OFF Name Description Settings TAM SETTINGS (FAX-B840 only) CALLER ID Name Description Settings MESSAGE LENGTH Set the maximum recording time for each recorded message. 0 seconds/30 seconds/60 seconds/ 120 seconds PASSWORD Set a four-digit PIN so that you can access the fax from remote locations. 0000 to 9999 TOLL SAVER Setting this feature to ON allows calls to be picked up after 2 rings when you have a new message. ON/OFF RING COUNT If you set TOLL SAVER to OFF, this feature allows you to set the number of times the fax rings. 1 to 15 times FWD SETTINGS Allows you to forward messages. ON/OFF FWD TEL NUMBER Forwarding telephone number. A maximum of 40 digits can be entered. – AUTO REDIAL Redial the previously dialed numb...

Herunterladen

Geben Sie zwei Ziffern: