Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
GEM DG-1000M Stand Alone Reader j Specification Operating Voltage: 12 VDC Memory Volume: 1000 PINs RF frequency: Mifare 13.56 MHz Current draw: 95~140mA/12VDC ■ Input: 1 contact for reqpuest-to -exit button, 1 contact for tamper switch ■ Output: 1 relay (dry contacts: N.O./N.C./Com)vandal resistant alarm (dry contacts: N.O./N.C./COM) ■ Relay Rating: 10A MAX/12VDC,120VAC ■ Relay Strike Time: 01~99 seconds or toggle mode (00) ■ Operating Temperature:-20°C~+70°C ■ Ambient Humidity: 5~95% relative humidity noncondensing ■ Lockout Function: The controller will be locked for 60 seconds upon entering 5 consecutive invalid master code or PINs. ■ LED status indication: 3 LED indicators display (Red/Yellow/Green) ■ Net Weight: 180g j Features Si Mifare High Frequency 13.56MHz Si Access mode selectable: card only ; card or PIN ; card+PIN ffl Non-Volatile Memory & Invalid PIN lockout Si Fully Programmable via keypad and master code Si USB connector Si Software free of charge Statement DM-1000M stand-alone Proximity Reader memorizes a set of ...