Stimmen - 6, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Honeywell Dateigröße: 1.63 mb Dateiname: Unterrichtssprache:

Follow manufacturers’ advice on the paint/vanish. It is possible to unscrew the four screws shown below for painting. Ensure you screw it back with the same screws provided! Once completed, clip it onto the base as in step 11. Installation Specification Chime Bell push Operating Temperature 32°F to 104°F 0.C to 40.C 14°F to 104°F -10.C to 40.C RF Frequency- US 916.8 MHz 916.8 MHz Range (open field) 450 ft. (140 m) Sound Level (typical) 90dBA @ 3 ft. (1 m) - RF Power - <1mW Battery Type LR14 (C size) CR2032 Battery Life (5 activations/day) 12 months 18 months Rain proof N/A Pass UL1598 rain test Troubleshooting A ‘beep’ sound is heard in learn mode… • The push you are programming has already been learned by the chime. • If you want to change the icon associated with the push, use the unlearn procedure, then program the push again. Two ‘beep’ sounds are heard after the normal chime sound… • This indicates a low battery in the bell push that activated the chime. Install a new battery, type CR2032. When the bell push is operated, the amber confidence light does not turn on, or is only on for a short time… • In normal operation, the amber light will turn on for 1 second. When the battery is weak, the light will only turn on for a short time. Install a new battery, type CR2032. The chime does not work… • Check that the batteries are the correct type, LR14 ‘C’ cells. Only use alkaline batteries. • Check that the batteries are fitted correctly. (No wrong polarity) • The chime could be out of range of the bell push. Try the chime in a different location. • The chime might not have learned the identity of the bell push. Follow the programming procedure. Troubleshooting The chime does not sound… • Check that the volume control is not at the minimum setting. Range is reduced… • Metal structures, including uPVC door frames can reduce the range of the product. Avoid mounting the push or chime on or near metal structures. • Other equipment can cause radio interference that affects your chime. • Walls and ceilings will reduce the range. • Weak batteries will reduce range. Replace every 12–18 months. In cold conditions (below 41.F [5.C]), batteries may need to be replaced more often. Amber light flashes… • When the chime battery is low, an amber light located at the side of the chime will flash every 5 seconds. Fit new batteries in the chime, type LR14 ‘C’ cells. Only use alkaline batteries. Troubleshooting Disposal & Recycling Batteries and waste electrical products should not be disposed of with household waste. Please recycle where these facilities exist. Check with your local authority or retailer for recycling advice. Guarantee Honeywell guarantees this product for 1 year from the date of purchase. Proof of purchase is required; this does not affect your statutory rights. If you require further information about your product, call the Honeywell helpline at 1-800-468-1502. Declaration Honeywell hereby declares that this product complies with Part 15 of the FC...

Herunterladen

Geben Sie zwei Ziffern: