Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
PC-7 is a commercial door made with particleboard core and skins. Solid lumber outer stiles along with Structural Composite Lumber (SCL) rails and inner stiles, are glued to the core prior to cold pressing a 3-ply skin each side of the core at ambient air temperature. Algoma Hardwoods, Inc uses only the better of two grades of door core particleboard conforming to ANSI Standard A208.1-1989, Grade LD-1. Algoma Hardwoods, Inc. uses only skins with face veneers at least .020" (0.5mm) thick at 12% moisture content. Thickness W (44mm) available FD ]h hour labeled. Maximum size Available prefit up to 4'0" x 8'0" (1219 x 2743mm), 8'0" x 8'0" pairs. Stiles (Edge bands) 13/e" (35mm) prior to factory trimming, glued to core. Alternates: ME-matching edges or CE-compatible edges. Top & bottom rails 1%" (35mm) prior to factory trimming, glued to core; Structural Composite Lumber (SCL). Core Conforms to ANSI A208.1-1989, GRADE LD-1 covering mat-formed particleboard. Faces Skins 0.10" (2.5mm) of several veneer species. Faces shall be a minimum of .020" (0.5mm) at 12% moisture content. Adhesives Type II (interior). Veneer matching Available in pairs. Details Standard lites and louvers available not to exceed 40% of door area or 54" (1372mm) in length. Maximum glass opening on FD V3 hour doors is 1,296 sq. in. (0836m2) with wood beads and clips or metal vision panels. Applied mouldings also available. Machining Available with hinge and lock machining as well as other hardware. Finishing Available in 8 standard colors, and clear. Warranty For interior, limited lifetime warranty. Exterior not warranted. Standards met or exceeded WDMA I.S. 1-A Series, WOOD FLUSH DOORS, AWI Section 1300. 8/10/08 1001 Perry Street • Algoma, Wisconsin 54201 920.487.5221 • 1.800.678.8910 • FAX 920.487.3636 ^ HAKUnUUIl» IHC. I I I I i i i i i • sales@algomahardwoods.com Door 23 PC-7 FD V3 Hour Door FEATURE WHI LABEL Maximum opening size Singles: 4'0" x 8'0" (1219 x 2438mm). Pairs: 8'0" x 8'0" (2438 x 2438mm). Faces Rotary Natural Birch, Sliced Red Oak, Paint Grade Birch, Rotary White Birch Stiles (Vertical Edges) and rails 1%" (35mm) mill option stiles. All doors have either matching or mill option outers. Up to 12V2" (318mm) bottom rails allowed. Maximum wood veneered beaded lite 1296 sq. inches (0.836m2). Maximums: 30" (762mm) width, 54" (1372mm) length Maximum metal vision panel (Visible lite) 1296 sq. inches (0.836m2). Maximums: 30" (762mm) width, 54" (1372mm) length Maximum fusible link louver size (Not allowed with vision panel or exit devices) Not allowed. Hinges Ball bearing steel mortised, half or full surfaced 4V2" x 4V2" x .134" (114.3 x 114.3 x 3.4mm) to 10'0" (3048mm). UL listed spring hinges 4V2" x 4V2" x .134" Locksets All listed cylindrical, mortised, unit, and hospital push/pull to 5" (127mm) backset. Unit locks only available with 23/4" (70mm) backset. Pivots Top, intermediate & bottom must be listed offset. Rixon's #180, 280, 380, 480, FM19, 219, T117, T117^A, or equal. Others as approved. Closers UL listed surface type. Fire Exit Hardware (Allowed with vision panel if non-interfering) Singles: Mortised, rim or surface vertical rods. Pairs: Rim (with mullion) or surface vertical rods. Double egress allowed. Other pair hardware Listed surface or mortised door bolts. Manual, self-latching or automatic as codes allow. Maximum trim: W (19mm) in the field. Additional trim: Can be up to 11V2" (292mm) if door is ordered with 12V2" (318mm) bottom rail. Maximum undercut, 3/4" (19mm). Door Bottoms: Any listed surface or concealed. Viewers: WHI up to 1" (25mm); UL up to V2" (12.7mm). Astragals and edge guards: Must be supplied and cut for hardware under label service. Wood Frames: FD V3 Hour doors can be installed with V3 hour wood frames. Electric Raceway: Available with label on all doors. 1001 Perry Street • Algoma, Wisconsin 54201 920.487.5221 • 1.800.678.8910 • FAX 920.487.3636 ^ HAKUnUUIl» IlHj. 1 1 1 1 1 1 1 1 1 • sales@algomahardwoods.com Door 24...