Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
Gently dock your iPhone or iPod. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges (until fully charged). Listening to iPhone/iPod 1. Dock the already playing iPhone/iPod in Dock. The unit will automatically turn on and you will hear the music playing from your iPhone/iPod. Note: If the playing song volume is too low on the iPhone/iPod, the unit may not detect iPod is in play mode. Press and release the Button to play it. 2. When an iPhone/iPod is docked and in standby mode, press and release the Button to play it. “iPod” will appear on the display to indicate iPod playing mode. 3. Press and release the Button again to pause play; press again to resume it. 4. Press the + or - Button to skip to the next or previous track on your iPhone/iPod. Press and hold the + or - Button to search within a track. 5. Press and release the or to adjust the system volume. 6. Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press the + or - Button to adjust settings . 7. To turn off the unit, press and release the Button. iPhone/iPod will continue charging while docked. Listening to Radio Setting up Antenna Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas. Snap AM antenna cable into AM Loop Antenna Socket on back of unit and snap antenna into the antenna stand. Move antenna 12” away from unit for best reception. Tuning and Playing the Radio 1. Press and release the Mode Button as needed to turn on the unit and cycle through iPod, FM radio, AM radio and AUX Line-in modes. 2. When the desired FM or AM mode is selected, press and release the + or - Button to tune the radio to a desired station. The current radio frequency appears in the lower right of the display. Press and hold the + or - Button for a few seconds to scan for the next clear station. 5 Using the Unit Using the Unit 3. You can set up to 12 presets (6 AM, 6 FM).To memorize a station as a preset: A. Press and release the Mode Button to select the desired AM or FM band. B. Press and release the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins flashing in the display. C. Press and release the + or - Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the next clear station. D. Press and release the Presets Button to confirm the setting. A confirmation beep will confirm the setting and the preset number you wish to assign. Repeat steps A-D to preset up to 6 stations per band. 4. To listen to a preset station, press and release the Mode Button to select the desired AM or FM band. Then press and release the Presets Button as needed to choose the desired preset. 5. Press and release the or Button to adjust the system volume. If desired, adjust the EQ as described under Listening to iPhone/iPod. 6. To turn off the radio (and the unit), press and release the Button. TIP: Download the iHome+Radio app from the App Store to enjoy thousands of internet radio stations from around the globe on your unit. Using the Aux Line-in Jack You can play any portable audio device with a standard 3.5 mm headphone jack through the unit via the Aux line-in Jack. 1. Plug one end of a standard audio patch cord (not included) into the headphone or line-out jack on your device and the other end of the patch cord into the unit’s Aux-in Jack located on the back of the unit. 2. Press and release the Mode Button until “Aux-in” appears in the lower part of the display. 3. Turn on and play your device. 4. Press and release the or Button to adjust the system volume. You may need to adjust the volume on your external device as well. 5. Press and release the EQ Button as needed to select Treble, Bass, Balance or 3D Sound, then press and release the + or - Button to adjust settings. 6. To turn off the unit, press and release the Button. Please remember to turn off your device, too. Sleep Operation Sleep mode lets you sleep to your iPhone/Pod or radio, gradually lowering the volume until the unit shuts off at the selected time. 1. Press and release the (bedtime) Button to enter sleep mode. The sleep time will show in the lower display. 2. Press and release the (bedtime) Button again as needed to adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF (power off). 3. When the display changes back to show the real time, press and release the (bedtime) Button once to show the sleep time remaining. Pressing it again will change sleep time to next lowest increment. 4. The unit has an independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the normal volume. Press and release the or Button to adjust the sleep volume. The sleep volume will remain at that level the next time you enter sleep mode until controls are changed. 5. To stop listening at any time, press and re...