Stimmen - 6, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
CardBus mode – move the switch to the side with the DOT indicator Text Box: Text Box: Text Box: CardBus Text Box: PCMCIA Text Box: Front view Text Box: Factory default setting is CardBus mode CardBus/PCMCIA driver Installation For Windows 95, 98, 98SE and Me (Do not run the SETUP program from the driver disk, SETUP Is for DOS or WIN 3.1 using PCMCIA mode only) 1. Power on your system and wait for the Desktop screen. 2. Connect the CardBus/PCMCIA cable and external AC/DC adapter into the back of your Mobile DVD/CDRW. 3. Plug the CardBus / PCMCIA card end of the cable into the PCMCIA slot on the side of your computer. 4. The system will automatically identify the new card and ask to load the driver. 5. Insert the driver diskette in “A” drive and follow the instruction on the screen to load “Addonics CardBus IDE Controller”. Be sure to select the A:/win9xMe folder when the system prompts for the location of driver disk. 6. When installation is finished, a PCMCIA card icon will appear in the lower right-hand of the Window’s system tray. 7. Double Click on the “My Computer” icon. Your Mobile DVD±R/ RW will appear as a CD drive icon. You are now ready to use the Mobile DVD±R/RW drive. PCMCIA Installation for Windows NT 1. Go to Start\Settings\Control Panel 2. Double Click SCSI adapter icon 3. Click on the Driver Tab 4. Click Add to add new driver 5. Follow wizard and browse to A:\NT folder for the Driver. 6. Windows will prompt you for driver location again, to continue Type in A:\NT then click continue. 7. Click YES to restart your computer. 8. Double Click on the “My Computer” icon. Your Mobile DVD±R/ RW will appear as a CD drive icon. You are now ready to use the DVD±R/RW drive. Note: You must use the PCMCIA mode for Windows NT. CardBus/PCMCIA Installation for Windows 2000 1. Make sure your computer is up and running 2. Verify that all cables are connected and there is power to the drive. 3. Insert the PCMCIA cable to the PCMCIA socket. 4. A "New Hardware Found" message shall pops up. 5. Select "Next" to continue installation. 6. Select "Search for a suitable driver...." button and select "Next". 7. In "select a Device Driver page", select "Have Disk" to specify location. Enter path like A:\win2kXp" Select "Addonics CardBus...." click YES for the Windows warning message and let Win2000 to finish the Installation and that's it. 8. Double Click on the “My Computer” icon. Your Mobile DVD±R/ RW Will appear as a CD drive icon. You are now ready to use the DVD±R/RW drive. CardBus/PCMCIA Driver Installation (Windows XP PCMCIA Installation Guide) 1. Make sure that all cables are properly connected and the drive has power. 2. If you are using the Mobile drives, make sure that the power brick has a steady green light. 3. Boot your computer to Windows. 4. Plug in the Cardbus/PCMCIA cable to the Computer's PCMCIA Socket/Port then insert the card to the Computer. 5. Windows should now find a new hardware and ask for the driver location. 6. Follow the Wizard. Click next to Continue. 7. Click the second radio button or select the ADVANCED button then Click Next. 8. Select the "Search for best driver in this location” . Check the “include this Location in the search” option only then click Browse. 9. Browse to your floppy drive and go to the A:\Win2kXp folder. 10. Select the WinXP driver then click OK, Click next to continue. 11. Click the "Continue Anyway" to proceed. 12. Let the OS install the Driver and that's it. Click Finish. Click YES to restart the Computer if prompted and that's it. For Sony and Sharp Notebook users Alternative installation procedures If you encountered system locked up using our standard installation procedures (Most common with Window 98 SE, Sharp and Sony Notebook computers and computers with Ricoh Cardbus/ PCMCIA Controller) please try to reinstall using the procedures outlined below: 1. Before installing the CardBus driver, make sure the CardBus is not Inserted into the PC Card slot. 2. Boot up the system and insert the CardBus driver diskette into Floppy Drive A 3. Click on the START button, then Settings and open the Control Panel 4. Click on the ADD NEW HARDWARE icon 5. Click NEXT and NEXT again, the screen will say Windows Will Now Search FOR PNP DEVICES, DO YOU WANT WINDOWS TO SEARCH 6. Choose NO, I WANT TO SELECT THE HARDWARE FROM A LIST 7. Click NEXT 8. Select HARD DISK CONTROLLERS from the hardware list 9. Click NEXT, and then click HAVE DISK 10. Type A: \Win9xme, then click OK 11. Highlight ADDONICS CARDBUS IDE CONTROLLER, then click FINISH. 12. Shut down the system. Reboot the system with the CardBus inserted Inside the PC CARD slot. Make sure the DVD drive is connected to the Other end of the CardBUS cable and the Drive is powered on. 13. The initialization of the DVD drive may take up to 40 seconds. During This time, mouse moving may be sluggish. After completing the Initialization, a new CD ROM drive icon should appear in the My Computer. You are now ready to use the DVD drive to ins...