Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
In addition to JVC TVs, other manufacturer’s TVs can also be controlled. ENTER SET UP o . Keep pressing SET UP down during step 1. 1 Press the number key A1B for 1, A2B for 2, A3B for 3 or A4B for 4 to change the remote control code, then press ENTER. 2 Press A on the unit to turn off the unit. 3 Press I on the unit for over 5 seconds while the unit is turned off. The code currently set appears on the front display panel. 4 Press o on the remote control to change the unit’s code. The code currently set on the remote control blinks on the front display panel for approximately 5 seconds, and is applied to the unit. NOTE: When APOWER SAVEB is set to AONB (Apg. 80), it is not possible to change the remote code. . Turn off the TV using its remote control. . Slide the TV/CABLE/SAT/DVD switch to TV. IMPORTANT: Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability. . Keep pressing SET UP down during step 1. 1 Enter your TV’s brand code using the number keys, then press ENTER. 2 Press A on the unit’s remote control to turn on the TV and try operations (Astep 3). . Once you have set the remote control to operate the TV, you do not have to repeat this step until you replace your remote control’s batteries. . Some brands of TVs have more than one code. If the TV does not function with one code, try entering another. 3 Press the corresponding buttons to operate the TV: A, TV AV/ VIDEO, PR +/–, TV8 +/–, TV d, number keys. . For some brands of TVs, you must press ENTER after having pressed the number keys. REMOTE CONTROL EN 75 BRAND NAME CODE JVC 01, 23, 24, 25 FERGUSON 27 FINLUX 30 FUNAI 32 LG/GOLDSTAR 18 GRUNDIG 19 HITACHI 10 ITT 28 MITSUBISHI 03 MIVAR 29 NEC 20 NOKIA 31 PANASONIC 04, 11 PHILIPS 02 RCA 05 SAMSUNG 12, 33, 34, 35 SANYO 13, 16 SHARP 06 SONY 07 THOMSON 26 TOSHIBA 08, 14 Satellite Receiver Multi-Brand Remote Control Your remote control can operate the basic functions of your satellite receiver set. In addition to JVC satellite receivers, other manufacturer’s satellite receivers can also be controlled. BRAND NAME CODE JVC 72, 73 AMSTRAD 60, 61, 62, 63, 92 CANAL + 81 D-BOX 85 ECHOSTAR (VIA DIGITAL) 82 FINLUX 68 FORCE 89 GALAXIS 88 GRUNDIG 64, 65 HIRSCHMANN 64 ITT NOKIA 68 KATHREIN 70, 71 LUXOR 68 MASCOM 93 MASPRO 70 NOKIA 87 PACE 67, 86, 92 PANASONIC 13, 14, 74 PHILIPS 66, 84 RFT 69 SAGEM 83 SALORA 68 SAMSUNG 05, 24 SKYMASTER 69 TPS 83 TRIAX 91 WISI 64 . Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT. IMPORTANT: Although the provided remote control unit is compatible with JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have limited function capability. . Keep pressing SET UP down during step 1. 1 Enter your satellite receiver’s brand code using the number keys, then press ENTER. 2 Press A on the unit’s remote control to turn on the satellite receiver and try operations (Astep 3). . Once you have set the remote control to operate the satellite receiver, you do not have to repeat this step until you replace your remote control’s batteries. . Some brands of satellite receivers have more than one code. If the satellite receiver does not function with one code, try entering another. 3 Press the corresponding buttons to operate the satellite receiver: A, PR +/–, number keys. . For some brands of satellite receivers, you must press ENTER after having pressed the number keys. . The number keys may not function with some satellite receivers. SYSTEM CONNECTIONS 76 EN Connecting To A Satellite Receiver Simple Connections This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector. Connect the satellite receiver to the [L-2 IN/DECODER] connector, then connect the [L-1 IN/OUT] connector to the TV’s connector. NOTES: . Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (Apg. 72) . You can use the Automatic Satellite Programme Recording function (Apg. 53) with this connection. (HDD deck only) . To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that AL-2B appears on the front display panel. . For details, refer to the instruction manual of the satellite receiver. Outdoor unit Satellite cable Satellite receiver Aerial TV aerial cable ANTENNA IN ANTENNA OUT TV IMPORTANT When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB (Apg. 72), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV AV/VIDEO on the remote control to turn off the VIDEO indicator on the front display panel. . If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV AV/ VIDEO on the remote control to set the unit to the AV mode. Perfect Con...