Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
NOTES: . Insert a disc after [INSERT DISC] is displayed on the camera. . Be sure to use the provided USB cable to connect the burner and the camera. . When using a camera, make sure the power is provided with the AC adapter, not the battery. . Do not subject the camera or burner to vibration or mechanical shock while writing to a disc. Be especially careful if the camera is placed on the burner during writing. . Refer to “Dubbing Video Files To DVD Discs” in the manual for writing discs. . The DVD discs that are written with this unit cannot be played with some DVD recorders/players. In that case, use [PLAY DVD] of the camera to playback discs. Connecting to PC A Connect the AC adapter to the burner. B Connect the power cord to the AC adapter. C Connect the power cord to an AC outlet. D Press the power button (C/B) on the front to turn on the burner. The power lamp lights in green. E Turn on the PC. F Connect the burner to the PC with the USB cable. NOTE: To connect the burner to a PC, use the USB cable provided with the camera. Power Cord AC Adapter (provided for the burner) USB Cable (provided for the camera) EN 5 Writing Software — CyberLink Power2Go 5.5 Lite — Writing Software — CyberLink Power2Go 5.5 Lite — Power2Go 5.5 Lite is software for writing video, image, audio, and other data files to data DVDs. System Requirements The following shows the system requirements for installation. Operating system Windows® XP Home Edition [XP] (pre-installed) or Windows® XP Professional [XP] (pre-installed) CPU Intel® Pentium® III, at least 800 MHz (Intel® Pentium® 4, at least 2 GHz recommended) Free hard disk space At least 50 MB for installation At least 5 GB recommended for making DVDs RAM At least 128 MB (at least 256 MB recommended) Connector USB 2.0/1.1* connector Display Must be capable of displaying 800 x 600 dots * If you use USB1.1 cable, it will take approximately 3 hours to write. Installation Procedure 1. Insert the installation CD-ROM in the CD-ROM drive. 2. The language selection screen appears. 3. The installation start screen appears. Click [Next]. 4. Confirm the contents and then click [Yes]. 5. Enter the user information and then click [Next]. Follow the on-screen instructions. 6. Installation starts. 7. The screen on the right appears when the installation is complete. Select the desired checkbox and then click [Finish]. . If you select [No, I will restart my computer later.], the setup complete screen in step 8. appears. 8. Click [Finish]. The installation is now finished. NOTES: . The above procedure is just a brief explanation on installing the software. For details on operating Power2Go 5.5 Lite, refer to the User’s guide, Help, and ReadMe installed at the same time as the software. You can view the User’s guide, Help, and ReadMe from the start menu of the PC. . This product does not apply to write files into CD-R or CD-RW. Also, it is not responded to all the functions of Power2Go 5.5 Lite. . To get customer support and to register the software, you need the following product key (CD-Key): PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS . Power2Go 5.5 Lite does not support conversion of audio files to MP3 format. . When the [Enter Activation Key] screen appears while using Power2Go 5.5 Lite, close the screen without entering the activation key. CyberLink Power2Go 5.5 Lite Contact Information For information on CyberLink Power2Go 5.5 Lite or other products, use the following contact information. Telephone/fax support Location Language Office hours (Mon. to Fri.) Phone # Fax # Germany English / German / French / Spanish/Italian/Dutch 9:00 am to 5:00 pm +49-700-462-92375 +49-241-70525-25 Taiwan Mandarin 9:00 am to 6:00 pm +886-2-8667-1298 ext. 333 +886-2-8667-1300 Paid voice support Location Language Lines are open (Mon. to Fri.) URL U.S.A. English 1:00 pm to 10:00 pm CST new_site/voice_support.jsp Support web/e-mail Language URL/e-mail address English German / French / Spanish / Italian goCyberlink@aixtema.de 6 EN Troubleshooting Troubleshooting If you think there is a malfunction, first check the following items. If you are still unable to solve the problem, consult your local JVC dealer. Trouble Cause/Action Cannot turn the power on. . Make sure the AC adapter is connected properly. The camera/PC is not recognized. . Make sure the USB cable is connected properly. The burner or AC adapter is hot. . This is not a malfunction. If the burner is abnormally hot, remove the AC adapter and consult the dealer from which you purchased the burner. Cannot open the disc tray. . A disc cannot be ejected by pressing the eject button if data is being written to the disc. Wait until writing finishes. . If a disc cannot be ejected with the eject button because of a failure or a malfunction caused by, for example, the burner being dropped, use the force eject hole to eject the disc. (See below.) Writing fai...