Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.) . The counter and tape remaining time readings will be incorrect. . During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour. . Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback. Basic Recording D Set the tape speed. . Turn on the TV and select the video channel (or AV mode). . Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. A A Load a cassette. Insert a cassette with the record safety tab intact. . The unit’s power comes on automatically and the counter is reset to 0:00:00. B B Select the VHS deck. On the unit Press VCR/DVD repeatedly so that the VCR indicator lights up. On the remote control Press VCR so that the VCR indicator lights up. C C Choose a programme. Press PR +/– or the number keys to select the channel you wish to record. Press p. The current setting appears on the front display panel or TV screen. Press p again to change the setting while the tape speed is displayed on the TV screen. E E Start recording. Press and hold 7 and press 4 on the remote control, or press 7 on the unit. . If “O.S.D.” is set to “ON” (. pg. 53), “MARK” blinks on the screen while an index code is being marked. . When “DIRECT REC” is set to “ON” (. pg. 53), if you press any button just after pressing 7 on the unit (or 7and 4on the remote control), the unit may not function properly. B.E.S.T. works at the beginning of both the first SP and the first LP recording after inserting the cassette. (. pg. 23) If “DIRECT REC” is set to “ON,” the programme that appears on the TV screen will be recorded. (. pg. 53) F F Pause/Resume recording. Press 9. Press 4 to resume recording. . You can select channel during the Record Pause mode. G G Stop recording. Press 8. Then press x on the VHS deck to remove the cassette. Recording Resume Function If there is a power outage during recording, Instant Timer Recording, or timer recording (. pg. 22, 26), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape. Record safety tab NOTE: When the end of the tape is reached during recording, the unit stops and “” and “$” blink on the front display panel. OPERATIONS ON VHS DECK (cont.) Recording Features . Turn on the TV and select the video channel (or AV mode). . Slide the TV/VCR/DVD switch on the remote control to the right. Slide to the right. Recording One Programme While Watching Another If your unit is connected to the TV via the AV connection, press TV/VCR. The unit’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view. . The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the unit’s PR buttons is recorded on the tape. NOTE: You can also use the DVD deck in the following cases. Before use, be sure to turn on the unit and select the DVD deck. . During recording . During timer recording . During timer standby mode Instant Timer Recording (ITR) This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished. 1 Start recording. Press 7 on the unit. 2 Engage the ITR mode. Press 7 again. “” blinks and “0:30” appears on the front display panel. 3 Set the recording duration. If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes. NOTES: . You can only perform ITR using the 7button on the unit’s front panel. . Still picture playback stops automatically after 5 minutes to protect the heads. . When the end of the tape is reached during Instant Timer Recording or timer recording, the unit is turned off and “” and “$” blink on the front display panel. . During Instant Timer Recording, any other timer programmed recording won’t start even if their start time has come. In such a case, the timer programmed recording starts (if the end time of the timer programmed recording is set after the end of Instant Timer Recording) after the Instant Timer Recording finishes. Elapsed Recording Time Indication 1 Set the counter display. Press ––:– – until a counter reading appears on the front display panel. 2 Reset the counter. Press 0000 before starting recording or playback. . The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback. Tape Remaining Time Press ––:– – until the time remaining on the tape appears. . The front displa...