Stimmen - 3, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
The purpose of this QuickStart document is to introduce the features and operation of the FireStore DR-DV5000. The complete User Guide is available on the CD-ROM that came with the FireStore unit. It is advised that users get familiarized with the product by reading the User Guide before attempting to use this product. If you are unable to locate the User Guide or require further assistance, please visit: Alternatively, contact your Focus Enhancements or JVC FireStore dealer/distributor. PHYSICAL FEATURES Your FireStore DR-DV5000 features two main surfaces, the front panel and the rear connector panel. Front Panel The front panel contains the backlit LCD and 9 buttons for controlling FireStore’s functions. The top row of buttons act as soft keys and provide the function displayed on the bottom of the LCD. The front panel also features a tally light, infrared remote sensor and power switch. PAGE 1 FireStore DR-DV5000 QuickStart Guide REAR CONNECTOR PANEL (C) (D) (B) (A) The rear connector panel features a 6-pin FireWire port for DV video I/O (A), a 6-pin FireWire port for connection of external FireWire drives or a computer (B), a 4-pin XLR DC power input (C) and a 3.5mm control cable input for RS232C, GPI or wired remote control (D). MOUNTING TO A CAMCORDER The FireStore DR-DV5000 is designed to mount directly to full size JVC Professional DV camcorders. When mounted to JVC GYDV5000/ 5000E/ 5001 camcorders, the DRDV5000 “hooks” to the rear of the camcorder in the usual position of the battery. To mount to a Professional DV series camcorder, do the following: 1) Remove and disconnect the attached battery system from the camcorder (including battery plate if applicable). 2) Ensure that appropriate power connectors are connected and that the battery gasket is positioned between DRDV- 5000 and camera. 3) “Hook” the DR-DV5000 to the rear of the the GY-DV5000 camcorder. 4) (If you are using a JVC DV500/550/700 camcorder, first install the supplied “Hook” plate to the rear of the camcorder using the supplied screws). Once DR-DV5000 is connected to the “hook” plate, the 52-pin connector should mount to the equivalent on the GY-DV5000 series. This connector does not exist on other camcorders. PAGE 2 FireStore DR-DV5000 QuickStart Guide 5) Once mounted, secure the two captive screws at the base of DR-DV5000 to the camcorder. 6) Re-attach the battery system to the rear of the DR-DV5000. Ensure to connect all power cables and utilize the supplied gasket between DR-DV5000 and the battery system. 7) Finally, connect a 6-pin to 4-pin FireWire cable from the 6-pin FireWire port on DR DV5000 marked “DV I/O” to the 4-pin FireWire port on the rear of the camcorder marked “DV”. (Connection of the 6-pin to 4-pin FireWire cable may not be necessary on all JVC camcorders (such as the GY-DV5000U(A). Check with JVC for information on different models. A flexible wire clamp located on the DR-DV5000 base provides restrain for the cable). Power Options The DR-DV5000 shares power with the GYDV5000 camcorder no matter which power source is used. The 4-pin power XLR on DRDV5000, the 4-pin power XLR on GYDV5000 or the battery system can power both DR-DV5000 and camcorder simultaneously. INSERTING AND REMOVING FSHDD-1 FIREWIRE DRIVES The best way to get to know the FireStore FSHDD-1 FireWire HDD is by studying the supplied manual. The manual provides detailed instructions and illustrations. INSERTING THE HDD: Insert the drive into the slot on top of the DR-DV5000 unit. Ensure that the power switch on the bottom side of the drive is set to “On” before inserting. The drive will only insert one way and features a “key” on one side to prevent incorrect insertion. Press down on the drive PAGE 3 FireStore DR-DV5000 QuickStart Guide handle firmly until the handle meets the top of Once ready for use, the DR-DV5000 default DR-DV5000. If power is on, you will observe Splash Screen will appear as follows: the power LED light up green. REMOVING THE HDD: Slide the HDD release latch on the DR-DV5000 top plate toward the battery system. Once slid as far as possible, hold the latch while at the same time grasping the FSHDD-1 drive handle and pulling the HDD out from DR-DV5000. GETTING STARTED Once DR-DV5000 has been mounted to a camcorder, a power source has been provided and the FSHDD-1 FireWire HDD has been inserted, it is now possible to prepare DRDV5000 for use. When powered up for the first time, the DR-DV5000 LCD will display “Welcome to DR-DV5000” and possibly “Please Wait...” depending on the disk drive being used. If a FSHDD-1 FireWire HDD comes from the factory, it should be configured and ready to use. If the message “No Disk Detected” appears, ensure you have a FSHDD-1 FireWire HDD inserted properly. If the message “No Format Detected” appears, you will first need to partition and format the inserted drive. DR-DV5000 will prompt you through the steps required to perform a format. WARNING: Formatting will erase all dat...