Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Setup with Q Link
Download from TV using
(Registered trademark of Panasonic)
Auto-Setup
You can download the tuning positions for analogue channels from the TV set.
Ch
34
5
Time and date will be set automatically by Auto Clock Setting function.
Di S
gituacl he
A S
utoe-n
S dee
t r
u , pb iitnte
p w
ro a
g rrte
e n
s .
s, please wait.
RER
T E
U T
R U
N R
: tN
o : aabbobrrtechen
Note that you must first perform a station search if you use the TV for the first time.
If you have a Panasonic television, [Download from TV] will be displayed automatically at
Download from TV
the beginning of the station transfer.
RETURN
Pos
4
! Switch your television on and select the AV channel.
Download in progress, please wait.
! Switch the device on using the Standby/on switch.
RETURN: to abort
The unit starts the station transfer. A station search for the digital channel starts first.
The number of channels found is displayed on the screen after the station search.
RETURN
Then the analogue station positions are automatically transferred from the television.
The station transfer is complete when the Owner ID screen appears.
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
Owner ID
RETURN button. Your DVD Recorder is now ready to use.
! To set the Owner ID now, use and press the Numeric buttons or
to enter a four-
PIN number * * * *
digit PIN number. Press , to correct the digit.
Name
! Make sure that you will remember the PIN number (make a note of it).
House No.
! Press the ENTER button twice to confirm.
Postcode
!
RETURN
Enter the [Name], [House No] and [Postcode] in the same way, using
.
! Press the ENTER button to confirm each entry.
RETURN : leave
! Press the RETURN button to leave the Owner ID screen.
! You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
Clock
(Auto clock set was not possible due to a weak signal)
! Press
to set the correct time and date and press ENTER to finish this setting.
Automatic Of
Time
Date
Note: A wrong date or time will influence the programmed recording of TV programmes
0 : 00 : 00
1 . 1 . 2005
(don't forget to change summer time and winter time).
No
0
9
Clock cannot be set automatical y.
If Auto-Setup has previously been completed the DVD Recorder will not start
CHANGE
SELECT Please set the clock manual y.
ENTER: store RETURN: leave
ENTER
Auto-Setup automatically. In this case you can re-start Auto-Setup again.
43
RETURN
If you want to cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
Setup without Q Link (Automatic Tuning)
Auto-Setup
The automatic setup saves all available TV stations. If the station also broadcasts date and
Auto-Setup
time, then the clock is also set automatically.
Ch
34
5
! Switch on your television and select the AV channel.
Di
!
S
gituacl he
A S
utoe-n
S d
e e
t r
u , pb iitnte
p w
ro a
g rrte
e n
s .
s, please wait.
With the Standby/on switch turn on the DVD Recorder.
RER
T E
U T
R U
N R
: tN
o : aabbobrrtechen
Automatic tuning for all available TV stations begins. The search is first performed for the
Auto-Setup
digital and then the analogue stations. The number of channels found is displayed on the
RETURN
screen after the station search. Approximate duration is 5 minutes.
Ch
34
5
After Automatic tuning has finished, the Owner ID screen will appear.
An S
al u
o cgh
u e
e S
A e
ut nod-e
S re,
t b
u it
p te
in w
pr aorte
grens.s, please wait.
RE R
T E
U T
R U
N: RtN
o :
a a
b b
or btrechen
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN
RETURN button. Your DVD Recorder is now ready to use.
! To set the Owner ID now, use and press the Numeric buttons or
to enter a four-
digit PIN number. Press , to correct the digit.
Owner ID
! Make sure that you will remember the PIN number (make a note of it).
PIN number * * * *
! Press the ENTER button twice to confirm.
Name
! Enter the [Name], [House No] and [Postcode] in the same way, using
.
House No.
! Press the ENTER button to confirm each entry.
Postcode
! Press the RETURN button to leave the Owner ID screen.
RETURN
! You will now see the TV picture. Your DVD Recorder is now ready to use.
RETURN : leave
If the clock setting menu appears
Clock
(Auto clock set was not possible due to a weak signal)
! Press
to set the correct time and date and press ENTER to finish this setting.
Automatic Of
Time
Date
Note: A wrong date or time will influence the programmed recording of TV programmes
0 : 00 : 00
1 . 1 . 2005
(don't forget to change summer time and winter time).
No
0
9
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Clock cannot be set automatical y.
CHANGE
SELECT Please set the clock manual y.
Setup automatically. In this case you can re-start Auto-Setup again. If you want to
43
ENTER: store RETURN: leave
ENTER RETURN
cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
11
...