Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
RQT8519-1B.fm Page 24 Tuesday, April 25, 2006 9:16 AM
Troubleshooting guide
Picture incorrect
Picture distorted.
≥ Ensure that the unit is not connected through a video cassette
Video is not
≥ Change the HDMI video output settings by using either of
recorder. (6)
output from HDMI
the procedures below.
≥ Have you selected an item in “Video Output Mode” (➜ page
AV OUT.
– Connect the television using VIDEO OUT or S VIDEO OUT
18, Picture Menu) that is incompatible with the connected
terminal, then set “Video Output” to “On” in the “HDMI” tab. (21)
equipment? Depending on the current connection status,
– Press and hold [CANCEL] until the picture is displayed.
perform corresponding steps.
The settings will change to “On”.
―When connecting to a television that is incompatible with
RGB video is not
≥ When connecting to an amplifier with an HDMI cable, set
progressive output using the COMPONENT VIDEO OUT
output from the
“Video Output” in the “HDMI” tab to “Off”. (21)
terminal:
SCART terminal.
Press and hold [CANCEL] until the picture displays
Progressive video
correctly. The settings will return to “480i” or “576i”.
―When connecting to a television with an HDMI cable:
There is ghosting
≥ This problem is caused by the editing method or material
Press and hold [CANCEL] until the picture displays
when progressive
used on DVD-Video, but should be corrected if you use
correctly. The settings will return to “480p” or “576p”.
output is on.
interlace output. Change “Video Output Mode” in Picture
―When connecting to an amplifier with an HDMI cable, and
Menu to “480i” or “576i”. (18)
to a television that is incompatible with progressive output
When connecting with HDMI AV OUT terminal, connect with the
using the COMPONENT VIDEO OUT terminal:
other terminals and change the settings in the following order:
1.Disconnect the HDMI (remove the cable/switch off the
1. Select “Video Output”(“HDMI” tab) to “Off”. (21)
ide
amplifier).
2. Select “Video Output Mode”(Picture Menu) to “480i”or “576i”. (18)
2.Press and hold [CANCEL] until the picture displays
Pictures not in
≥ If the unit is connected to the television through VIDEO OUT,
correctly. The settings will return to “480i” or “576i”.
progressive output.
S VIDEO OUT or SCART terminal, output will be interlace.
3.Set “Video Output” to “Off” in the “HDMI” tab. (21)
4.Connect the HDMI (connect the cable/switch on the amplifier).
Sound incorrect
≥ [DivX] Change “Source Select” in Picture Menu. (18)
Sound distorted.
≥ Select “Off” in “Advanced Surround”. (12)
Picture size
≥ Change “TV Aspect” in “Video” tab. (20)
≥ Set “Attenuator” in Audio Menu to “On” if it causes distortion
doesn’t fit the
≥ Use the television to change the aspect. If your television does not
with 2ch or 5.1ch AUDIO OUT terminals. (19)
hooting gu
screen.
have that function, change “4:3 Aspect” in Display Menu. (19)
≥ Noise may occur when playing WMA files.
≥ Change the Zoom setting. (13)
≥[DVD-A] The disc may have restrictions on the method of
les
Picture stops.
≥ Picture may stop if the DivX files are greater than 2GB.
audio output. With some multi-channel discs, unless the
When playing PAL
≥ Set “Transfer Mode” in Picture Menu to “Auto”. (18)
number of connected speakers is the same as the disc’s
disc, picture
channel specification, audio will not be output properly. Refer
distorted.
to the disc’s jacket for more information.
r
oub
T
The television
≥ The unit and television are using different video systems.
≥With HDMI AV OUT connections, audio may not be output
may display
[Asia] Use a multi-system or NTSC television.
from other terminals in the way that was set.
incorrectly or
[Others] Use a multi-system or PAL television.
≥Match the speaker settings with the connected equipment. (21)
colours appear
≥ The system used on the disc doesn’t match your television.
Piercing noise
≥ If you have connected a digital amplifier which does not
faded.
–PAL discs cannot be correctly viewed on an NTSC television.
comes from the
include decoder, be sure to select “PCM” in “Dolby Digital”,
–This unit can convert NTSC signals to PAL 60 for viewing on
speakers.
“DTS Digital Surround” or “MPEG”§1 in “Audio” tab. (21)
a PAL television (“NTSC Disc Output” in “Video” tab). (20)
≥
≥
Connect to a progressive output compatible television to enjoy
Effects do not
None of the audio effects work when the unit is outputting
progressive video.
work.
bitstream signals from the COAXIAL, OPTICAL or HDMI AV
≥ Picture may not be seen when more than 4 devices are connected
OUT terminal. (7, 8)
≥ Some audio effects do not work or have less effect with some discs.
with HDMI cables. Reduce the number of connected devices.
≥Night Sound Mode, H.Bass, Advanced Surround, Multi Re-
Menu not displayed
≥ Restore the zoom ratio to a1.00. (13)
master and Sound Enhancement do not work if you have
correctly.
≥ Set “Subtitle Position” in Display Menu to “0”. (19)
changed the play speed.
9
≥ Set “4:3 Aspect” in Display Menu to “Normal”. (19)
≥ With HDMI AV OUT connections, HDCD discs are played as normal CDs.
51
Auto zoom
≥ Turn off TV’s zoom function.
function does not
≥ Use the other preset aspect ratios or manual adjustment. (13)
No sound
≥ There may be a pause in sound when you change the play speed.
≥Audio may not be heard when more than 4 devices are connected
RQT8
work well.
≥ Zoom function may not work well, especially in dark scenes
and may not work depending on the type of disc.
with HDMI cables. Reduce the number of connected devices.
24
≥[DivX] Audio may not be output due to how files were created. (5)
...