Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Default value if OFF. @) % J ^ llonnll) ¿Al HDMI SETUP HDMI RESOLUTION 9 4119IM.indd 9 20.02.2008 15:16:08 ENGLISH Custom setup page PREFERENCE PAGE TV TYPE PBC AUDIO SUBTITLE DISC MENU PARENTAL DEFAULT V_y This is page is available only when no disc in the tray. • TV type Your player supports all TV systems. You can choose PAL, NTSC or AUTO (multi system mode). AUTO (multi system mode): TV system is switched automatically according to disk color system. NTSC: this system is employed in USA, Taiwan, Japan and etc. PAL: this system is employed in China, Europe, Hong Kong and etc. • РВС (playback control) You can switch on or off this function of playback control (PBC function). • Sound (choosing language), subtitle, disk menu These parameters could be preset according to your preferences. If preset parameters are supported by disk’s content, playback is going on according to your settings. Otherwise disk’s default settings are used. You can change playback settings by pressing buttons AUDIO and SUBTITLE. • Parental control function This function is intended for parental control of disk content during playback and protects your children from watching the objectionable scenes. Disk with lever higher then the level preset by this function will not be played. • Default Return to factory settings. • Password mode When password mode is OFF, you can set parental control level (menu Custom preference page -> Parental control). In order to make change of parental control level impossible, switch on password mode. • Password You can change password using this option. Select Password -> Change. Input the old password in pop-up window (or default password - 136900), then input new password and input new password again. Press PLAY button to save new password. Main functions POWER (power supply on) • Press button STANDBY located on front panel of DVD player or POWER button on remote control to switch on player’ power supply. • Use POWER button located on remote control to switch to standby mode. OPEN/CLOSE (disk tray open/close) • Press button OPEN/CLOSE located on front panel of DVD player or button A on remote control to open disk tray. Load a disk into tray by its operating surface looking down (label up). Press button OPEN/CLOSE once more to close the tray, player will start playback automatically. (For MP3 and JPEG disks function of automatic playback is not applicable.) VOLUME (volume level adjustment) • Use buttons VOLUME +/- to increase or decrease volume level. MUTE (sound off) • Press button MUTE to switch off the sound completely. Press button MUTE or volume control buttons once more to switch on the sound. PLAY/PAUSE (play back on/play back pause) • Press button ► located on remote control or on front panel of DVD player to start playback. To stop playback press button PAUSE located on remote control or on front panel of DVD player. To return to normal playback mode press button ►. STOP (play back stop) • When playing back DVD, SVCD, VCD, CD disks press button STOP once, player will remember the point of stop. Press button ► located on remote control or on front panel of DVD player to continue. Press STOP button second time to stop player completely. F.REV ◄◄ and F.FWD ►► (rewind/wind forward) • Press button F.FWD ►► for fast winding forward • Press button F.REV ◄◄ for fast rewind PREV !◄◄/ NEXT ►►I (skip to previous/next track) • When playing back DVD disks press button PREV (I ◄◄) located on remote control or on front panel of DVD player to skip to previous chapter. • When playing back SVCD, VCD, CD disks press button PREV (I ◄◄) to skip to previous track. • When playing back DVD disks press button NEXT (►►I) located on remote control or on front panel of DVD player to skip to next chapter. • When playing back SVCD, VCD, CD disks press button NEXT (►►I) to skip to next track. PROG (programming) • If disk includes two or more tracks, chapters or titles you can set your own playback order using this button. • Press button PROG to enter programming mode, program menu appears on the screen. Press number buttons to set number of track, chapter or title. To set number 10 and more use button 10+. For example, to input number 26 press the next sequence of buttons: 10+, 10+, 6. If there are more then 10 entries, press NEXT ► ►I to continue program table (maximal number of entries is 20). Use cursor buttons (|^^T) to move cursor. After the program is completed select menu item “start” using cursor buttons and press button ► to start playback of programmed sequence. • Programming is not applicable for MP3, DiV X disks. Pres button PROG once to open file list. You can select a file you need to play using cursor buttons. TITLE/PBC (titles/playback control) • When playing back DVD disks press button TITLE/PBC to display main menu (in case of some disks - to go to disk menu). • When playing back SVCD, VCD2.0 disks press button TITLE/PBC to display di...