Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Kenwood Dateigröße: 3.7 mb Dateiname: dvf8100.pdf Unterrichtssprache:

% CLEAR key $™ ^ ANGLE key . SETUP # & RANDOM key . ZOOM key . NotesNotes 1. The provided batteries are intended for use in operation checking, and their service life may be short. 2. When the remote controllable distance becomes short, replace both of the batteries with new ones. 3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction. 13Set Up functions 13Set Up functions Preparation for Set Up 1Set the POWER key (ON/ STANDBY key ) to power on. MAIN UNIT 2Set Video Format according to the connected TV type. (To select TV Type 7) If the video formats of the disc and TV do not mach, press and hold PAUSE key on the front panel for more than 5 sec- onds to be able to select a TV type (PAL, NTSC or AUTO). (No disc inserted) Set up menu Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 14 to 16. To display and exit the Menu: General Operation Preparations Press SETUP key to display the menu. A second press of SETUP key will take you back to initial screen. To go to the next level: Press the Cursor right ( 3) key on the remote. To go back to the previous level: Press the Cursor left ( 2) key on the remote. 1Press SETUP key. The Setup menu appears. 2Use the Cursor up/down (5/.) keys on the remote to select the desired option, then press the Cur- sor right (3) key to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3Use the Cursor up/down (5/.) keys on the remote to select the second desired option, then press the Cursor right (3) key to move to the third level. 4Use the Cursor up/down (5/.) keys on the remote to select the desired setting, then press ENTER key to confirm your selection. Some items require additional steps. 5Press SETUP key or PLAY key to exit the Setup menu. Set Up functions14 Set Up functions14 Preparations LANGUAGE Menu Language Select a language for the Setup menu and on-screen display. Disc Audio/ subtitle/ Menu Select the language you prefer for the audio Track (disc audio), subtitles, and the disc menu Original: Refers to the original language in which the disc was recorded. Other: To select another language, press number but- tons then ENTER key to enter the corresponding digit number according to the language code list in the refer- ence chapter. If You enter the wrong Language code, press CLEAR key. DISPLAY TV Aspect 16 : 9 Display Mode Widescreen Progressive Scan Off TV Output Select RGB TV Aspect 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. Display Mode Display Mode setting works only when the TV Aspect mode is set to "4:3". Letterbox: Displays a wide picture with bands on the upper and lower portions of the screen. Panscan: Automatically displays the wide Picture on the entire screen and cuts off the portions that do not fit. Progressive Scan When ON is selected, the confirmation screen for switching to Progressive Scan appears. In case of a TV not compatible with Progressive Scan, the screen disappears and return to the original display is made after 10 seconds. TV Output Select (only for Europe) The TV Output Select mode is switched to RGB or YCbCr. AUDIO Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Dolby Digital/ DTS/ MPEG Bitstream: Select "Bit stream" if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG de coder. PCM (for Dolby Digital/ MPEG): Select when con nected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically down mixed to two-channel PCM audio. Off (for DTS): If you select “Off'', the DTS signal is not output through the DIGITAL OUT jack. Sample Freq. (Frequency) If you receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit passes each type of signal through without any further processing. Check the documentation for your amplifier to verify its capabilities. When the disc prohibits 96 kHz digital output, the signal always is put out after down-conversion. Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sou...

Herunterladen

Geben Sie zwei Ziffern: