Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
For details of menu operation, see “5-2 Menu Operations” on page 5-2. Note To access the extended menu, it is required to set MENU GRADE, basic menu item 099, to “ENHAN.” 5-6 Chapter 5 Setup Menu 5-3 Basic Menu 5-3 Basic Menu Items in the basic menu The basic menu contains the following items. default settings are indicated by an enclosing box. In the “Settings” column of the table, the factory Item number Item name Settings 002a) CHARACTER H- POSITION Adjusts the horizontal screen position of the character information output from the VIDEO OUTPUT connectors for superimposed display on the monitor. 0 ... 4 ... 8: The value 0 is for the far left of the screen and 8 for the far right. Increasing the value moves the position of the characters to the right. 003a), b) CHARACTER V- POSITION Adjusts the vertical screen position of the first line of the character information output from the VIDEO OUTPUT connectors for superimposed display on the monitor. 0 ... 13 ... 16 (29.97/23.98PD system (J-H3 only))/0 ... 14 ... 17 (25/24 (J-H3 only) /23.98 system (J-H3 only)): The value 0 is for the top of the screen and increasing the value lowers the position of the characters. 005 DISPLAY INFORMATION SELECT Determines the kind of character information to be output from the VIDEO OUTPUT connectors. OFF : Displays no character information. T&STA : Time data display information and the unit’s status T&UB: Time data display information and the user bits T&CTL: Time data display information and CTL T&T: Time data display information and time code (LTC or VITC) TIME: Time data display information only When the system frequency is set to 23.98PD, 29.97-frame time code and 23.98- frame time code are displayed in two rows as shown below (J-H3 only). If there is an overlap between the setting of this item and the character information selected by the setting of the control panel, output of the overlapped information is automatically avoided. For example, if CTL is selected on the control panel and this menu item setting is T&CTL, CTL and LTC will be output. 007 TAPE TIMER DISPLAY Determines whether to display the CTL counter in 12-hour mode or 24-hour mode. + –12H : 12-hour mode 24H: 24-hour mode 012 CONDITION DISPLAY ON VIDEO MONITOR Determines whether or not to display the channel status in addition to the characters being superimposed. DIS : Disables display. ENA: Enables display. Displayed channel status The channel statuses are displayed under the timer or status display line. e.g. V — A — The letters that follow “V” indicate the status of the video channels of the rotation head. The letters that follow “A” indicate the status of the audio channels of the rotation head. Character patterns –: Good condition *: Acceptable condition x: Bad condition 009a) CHARACTER TYPE Determines the type of characters, such as time code, output from the VIDEO OUTPUT connectors for superimposed display on the monitor. WHITE : White letters on a black background BLACK: Black letters on a white background W/OUT: White letters with black outlines B/OUT: Black letters with white outlines 29.97-frame time code 23.98-frame time code Chapter 5 Setup Menu a) When setting items 002, 003 and 009, watch the monitor b) When displaying time code values, there is a slight time screen, and adjust to the required state. delay. Therefore, when creating a tape for off-line editing, the information inserted in the upper half of the screen may be delayed by one frame. Chapter 5 Setup Menu 5-7 5-3 Basic Menu Chapter 5 Setup Menu Item number Item name Settings 013 SYSTEM FREQUENCY SELECT Specifies whether to enable switching the system frequencies. OFF : Do not enable system switching. ON: Enable system switching. You can switch the system frequencies of this unit between 29.97, 25, 24 (J-H3 only), 23.98 (J-H3 only) and 23.98PD (J-H3 only). For information on how to switch the system or other details, see “Switching system frequency (menu item 013)” on page 5-4. 020 DROP-FRAME MODE SELECT (J-H1:29.97 system only) (J-H3: 29.97/23.98PD system only) Determines the drop-frame mode of the CTL counter. DF : Drop-frame mode NDF: Non-drop-frame mode Note When the unit operates in the 23.98PD system, the setting of this item determines the advancement mode (DF/NDF) of the output time code. 022 PF2 KEY SELECT Determines the function assigned to the PF2 button. REM : Displays the remaining tape time in minutes. RUN : Displays the total number of times that the tape has been running up until that time. 024 MENU CHARACTER TYPE Selects the type of characters to superimpose on the video signal (overlaid display) output from the VIDEO OUTPUT connectors. WHITE : White letters on a black background BLACK: Black letters on a white background W/OUT: White letters with black outlines B/OUT: Black letters with white outlines 026 AUDIO MONITOR MODE Select a mode of AUDIO MONITOR. MONO: Monaural STEREO : Stereo + mix All: Monaural + stereo + mix 027 SD CHARACTER (J-H3: 29.97/25/23.98PD syste...